Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 98093A450 specification
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
18.0 mm and 23.0 mm
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
30.0 mm
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
hexagon extended washer
A measurement from the bottom to the top of the head,in distinction from depth.
5.5 mm
10.0 majorin.
14.2 majorin.
The national stock number or the identification information of the end equipment for which the item is a part.
mrap - unique nsn - used on 2 mrap variants
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
6.0 mm
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
150000 pounds per square inch
A measurement of distance between corresponding points on two adjacent threads measured parallel to the thread axis,expressed in millimeters.
1.0
A numeric-alpha designator indicating established pitch and crest diameter tolerance positions and grades of an external thread.
6g
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
cap screw
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
material is class 10.9 steel; head style is flange hex and flange dia is 14mm
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.
black
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
phosphate
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
m
Answers.
1EA
M
Steel
Hexagon extended washer
18.0 millimeters minimum and 23.0 millimeters maximum
Right-hand
Schedule B number: 8710000090
nmfc 096640
Parts of armored fighting vehicles,motorized, whether or not fitted with weapons
FSC 5305 ⁓ Screws
NSN 5305-01-572-5377 SCREW,CAP,HEXAGON HEAD
Used on mrap - unique nsn - 2 mrap variants. m thread series phosphate surface treated material is class 10.9 steel; head style is flange hex cap screw hexagon extended washer head style 18.0mm thread length right-hand
- NIIN
- 015725377
- NIIN Date
- 03/13/09
- Schedule B
- 8710000090
- Name Code
- 18257
- FIIG
- A003B0
- Item Weight
- 0.000lbs
- Item Dimensions
- 480
- QUP
- 1
- Historical Price
- $26.83 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 29KP412 | Cage 45152 |
| 2. | 29KP412 | Cage 75Q65 |
Major End Users Countries and entities
- - Department of The Army
- - U.s. Marine Corps
Availability for 98093A450 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 096640 SCREWS, IRON OR STEEL
- UFC (universal freight code)
- 50600
Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
98093A450 / Screw,cap,hexagon headWhat is the formal definition of this item?
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
