Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 92620A876 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
3.5in. ⁓3-1/2"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
hexagon
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
1.125in.
A measurement from the bottom to the top of the head,in distinction from depth.
0.5in. ⁓1/2"
The national stock number or the identification information of the end equipment for which the item is a part.
mrap buffalo MK2A2
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
150000 pounds per square inch
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
33.0 rockwell c
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
high strength steel cap screw, grade 8
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
thread size: 3/4"-16, fully threaded; screw size: 3/4" (0.750")
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
zinc
Answers.
Steel
Hexagon
3.5 inches
2a
Schedule B number: 7318152000
nmfc 096640
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
NSN 5305-01-633-4865 SCREW,CAP,HEXAGON HEAD
Used on mrap buffalo mk2a2. zinc surface treated thread size: 3/4"-16, fully threaded; screw size: 3/4" (0.750") high strength steel cap screw, grade 8 hexagon head style 3.5" thread length 2a thread class
- NIIN
- 016334865
- NIIN Date
- 11/24/14
- Schedule B
- 7318152000
- Name Code
- 18257
- FIIG
- A003B0
- Item Weight
- 0.000lbs
- Item Dimensions
- DEMIL / ITAR
- Uncontrolled item (Code )
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- --
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - U.s. Marine Corps
Availability for 92620A876 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 096640 SCREWS, IRON OR STEEL
- UFC (universal freight code)
- 50600
Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
92620A876 / Screw,cap,hexagon headWhat is the formal definition of this item?
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
