Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 91280A804 specification
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
40.0 mm and 50.0 mm
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
140.0 mm
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
hexagon
A measurement from the bottom to the top of the head,in distinction from depth.
8.8 mm
22.0 mm
The national stock number or the identification information of the end equipment for which the item is a part.
2355-01-529-2246 mine resistant vehicle, joint eod rapid response vehicle (jerrv) cougar, 6X6
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
116000 pounds per square inch
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
21.0 rockwell c
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
M14 x 2.0 x 140 hex head bolt
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
din specificaiton:din 931; finish:ZINC-Plated; grade/class:8.8; thread length:partially threaded; thread fit:6h; SELF-Locking method:none
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
zinc
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
m
Answers.
M
Steel
Hexagon
40.0 millimeters minimum and 50.0 millimeters maximum
Right-hand
Schedule B number: 8710000090
nmfc 096640
Parts of armored fighting vehicles,motorized, whether or not fitted with weapons
FSC 5305 ⁓ Screws
NSN 5305-01-578-9577 SCREW,CAP,HEXAGON HEAD
Used on 2355-01-529-2246 mine resistant vehicle,joint eod rapid response vehicle (jerrv) cougar,6x6. m thread series zinc surface treated din specificaiton:din 931; finish:zinc-plated; grade/class:8.8; thread length:partially threaded; thread fit:6h; self-locking method:none M14 x 2.0 x 140 hex head bolt hexagon head style 40.0mm thread length right-hand
- NIIN
- 015789577
- NIIN Date
- 10/26/09
- Schedule B
- 8710000090
- Name Code
- 18257
- FIIG
- A003B0
- QUP
- Historical Price
- $36.30 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Army
- - Department of The Air Force
- - Department of The Navy
- - U.s. Marine Corps
Availability for 91280A804 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Bolts or nuts (iron or steel),(less than 35 feet)
- NMFC (national motor freight code)
- 096640 SCREWS, IRON OR STEEL
- UFC (universal freight code)
- 50600
Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
91280A804 / Screw,cap,hexagon headWhat is the formal definition of this item?
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
