Serving our customers with quality and safety first.
2a
RIGHT-Hand
1.250in. ⁓1-1/4"
1.188in. and 1.250in. ⁓1-1/4"
hexagon
0.302in. and 0.323in. ⁓21/64"
0.736in. and 0.750in.
0.094in. ⁓3/32"
0.500in. ⁓1/2"
1
drilled
13
150000 pounds per square inch
32.0 rockwell c and 38.0 rockwell c
hexagon flats
63.0 microinches threads
steel
sae gr 8 assn std single material response
zinc and chromate
astm B633 ty 2 sc 3 assn std single treatment response
unc
2 type and 10p style and 8 grade
1HD
Unc
Steel
13
0.094 inches
Hexagon
1.250 inches maximum
Right-hand
2a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
unc thread series zinc surface treated 13 thread quantity per inch 0.094" hole diameter hexagon head style 1.250" thread length right-hand 2a thread class
1. | MS51095-413L | Cage D9182 |
2. | B1821BH050125D | Cage 80204 |
3. | F-116-212 PIECE 787 | Cage 11440 |
4. | SP-59 PIECE 41 | Cage 06289 |
5. | FF-S-85TY2STY10P(.50-13NC1.25) | Cage 81348 |
6. | SK-2000-2 | Cage 0EAK3 |
7. | 1J5999 | Cage 11083 |
8. | B1821BH050C125D | Cage 80204 |
9. | 35A2D | Cage 33968 |
10. | 35AZD | Cage 33968 |
11. | A-2874 PIECE 17 | Cage 71871 |
12. | 13-820 | Cage D9182 |
13. | FFS85 | Cage 81348 |
14. | MS51095-413 | Cage 96906 |
15. | MS18154-113 | Cage 96906 |
16. | 10082653 | Cage A486G |
17. | 5305PL0692281 | Cage 9009H |
18. | 5310009158087 | Cage SCY13 |
Nothing similar to this part number was found in our inventory
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.