Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 814-6035 specification
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
25.0 mm
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
35.0 mm
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
hexagon
A measurement from the bottom to the top of the head,in distinction from depth.
3.8 mm and 4.1 mm
12.7 mm and 13.0 mm
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
6.0 mm
A measurement of distance between corresponding points on two adjacent threads measured parallel to the thread axis,expressed in millimeters.
1.0
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
hex head bolt, metric coarse series threads per iso 4014, material class 8.8
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
made in accordance with international organization for standardization using iso 4014
The chemical compound or mechanical mixture properties of which the item is fabricated.
zinc alloy
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
chromate
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
iso m
Answers.
Iso m
Zinc alloy
Hexagon
25.0 millimeters
Right-hand
Schedule B number: 7907006000
Zinc articles
FSC 5305 ⁓ Screws
NSN 5305-01-443-1431 SCREW,CAP,HEXAGON HEAD
iso m thread series chromate surface treated made in accordance with international organization for standardization using iso 4014 hex head bolt, metric coarse series threads per iso 4014, material class 8.8 hexagon head style 25.0mm thread length right-hand
- NIIN
- 014431431
- NIIN Date
- 04/02/97
- Schedule B
- 7907006000
- Name Code
- 18257
- FIIG
- A003B0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | P533811E | Cage 03YK2 |
| 2. | P533811E | Cage 03YK2 |
Availability for 814-6035 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
814-6035 / Screw,cap,hexagon headWhat is the formal definition of this item?
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
