Serving our customers with quality and safety first.
2a
RIGHT-Hand
0.625in. ⁓5/8"
0.625in. ⁓5/8"
hexagon
0.150in. and 0.163in. ⁓11/64"
0.428in. and 0.438in.
mrap - cougar
0.250in. ⁓1/4"
finished head
28
150000 pounds per square inch
32.0 rockwell c and 38.0 rockwell c
120000 pounds per square inch
steel
SAEJ429GRADE8 assn std single material response
zinc and chromate
astm B633 ty 2 sc 3 assn std single treatment response
unf
2 type and 10p style and 8 grade
1HD
Unf
Steel
28
Hexagon
0.625 inches maximum
Right-hand
2a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
Used on mrap - cougar. unf thread series zinc surface treated 28 thread quantity per inch hexagon head style 0.625" thread length right-hand 2a thread class
1. | FF-S-85 | Cage 81348 |
2. | 18C410 | Cage 77237 |
3. | 181311 | Cage 72915 |
4. | B1821BH025F063N | Cage 80204 |
5. | 45524-22 | Cage 19315 |
6. | 45524-22 | Cage 99551 |
7. | 728HX1 | Cage 45152 |
8. | B1821BH025F063N | Cage 51792 |
9. | XX002-0964 | Cage H2229 |
10. | MS35292-5 | Cage 96906 |
11. | MS90726-5 | Cage 96906 |
12. | MS90727-5 | Cage 96906 |
13. | 18C410 | Cage 12603 |
14. | 5305-267-8953 | Cage SCY13 |
15. | 5305000680505 | Cage SCY13 |
16. | 5305002678953 | Cage SCY13 |
17. | 5305PL0895366 | Cage 9009H |
18. | 728HX1 | Cage 75Q65 |
19. | 5305000680505 | Cage A00AM |
20. | 530500680505 | Cage A00AM |
Nothing similar to this part number was found in our inventory
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.