Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 7237703P042 specification
Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a
Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.594in. ⁓19/32"
Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.750in. ⁓3/4"
Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
hexagon
Head Height
A measurement from the bottom to the top of the head,in distinction from depth.
A measurement from the bottom to the top of the head,in distinction from depth.
0.226in. and 0.243in. ⁓1/4"
Width Between Flats
0.551in. and 0.562in.
End Item Identification
The national stock number or the identification information of the end equipment for which the item is a part.
The national stock number or the identification information of the end equipment for which the item is a part.
mrap RG-33
Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.375in. ⁓3/8"
Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
16
Material
The chemical compound or mechanical mixture properties of which the item is fabricated.
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 316
Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
66 fed std all material responses
Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate
Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc
Answers.
What class is the thread series?
Unc
What material is the cap hexagon head screw made of ?
Steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 316
What is the thread quantity per inch?
16
What is the head style?
Hexagon
What is the thread length?
0.594 inches minimum
What is the thread direction?
Right-hand
What is the thread class?
2a
How is this classified for shipping?
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
What's the federal classification of 7237703P042?
FSC 5305 ⁓ Screws
NSN 5305-00-632-2777 SCREW,CAP,HEXAGON HEAD
Used on mrap rg-33. unc thread series passivate surface treated 16 thread quantity per inch hexagon head style 0.594" thread length right-hand 2a thread class
- NIIN
- 006322777
- NIIN Date
- 01/01/63
- Schedule B
- 7318152000
- Name Code
- 18257
- FIIG
- A003B0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- Historical Price
- $0.50 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | MS35307-358 | Cage D9182 |
| 2. | 92-AV101-N-SYM-13B | Cage 0JF20 |
| 3. | 4594493-ITEM-34 | Cage 80064 |
| 4. | 49M68-58-01-IT-34 | Cage 96169 |
| 5. | 3122 | Cage 62321 |
| 6. | E108186 PART NO 260 | Cage 3X894 |
| 7. | 306-16120 | Cage D9182 |
| 8. | 306-16124 | Cage D9182 |
| 9. | 0419-503 | Cage 56232 |
| 10. | A3210095-1 | Cage 80063 |
| 11. | MS35307-358 | Cage 80205 |
| 12. | F23 | Cage 00365 |
| 13. | 136011A124 | Cage 31550 |
| 14. | MS35307-358 | Cage 96906 |
| 15. | 136011A124 | Cage 28528 |
| 16. | 5305006322777 | Cage SCY13 |
Major End Users Countries and entities
- - National Aeronautics And Space Administration
- - National Aeronautics And Space Administration
- - National Aeronautics And Space Administration
- - Department of The Navy
- - Department of The Army
- - Department of The Air Force
- - U.s. Marine Corps
- - U.s. Coast Guard
- - Austria
- - Poland
- - Spain
- - Brazil
- - Singapore
- - Morocco
- - Malaysia
- - Australia
- - Belgium
- - Canada
- - Germany
- - Republic of Korea
- - United Kingdom
- - Portugal
- - Italy
- - Greece
- - Turkey
Major End Items End use applications
- - Support equipment, b-52 aircraft
- - Support equipment, b-1 aircraft
- - Communications terminal, satellite an/gsc-39(v)1
- - Stream (std. tensioned replenishment at sea method)
- - Traffic jam, an/tlq-17a
- - Aircraft, sof ( ac-130h, mc-130h, ec-130e, hc-130)
- - Aircraft, c-2a (reprocured)
- - Helicopter landing system, lamps mk iii
- - Engine, aircraft, f100-pw-100 (f-15a/b/c/d)
- - Plug-in unit,electrical-electronic test equipment
- - Shop equipment,guided missile system
- - Teletypewriter
- - Receiver-transmitter,radio
- - Vpa assembly
- - Landing control central
- - Generator,signal
- - Digital communicati
- - Oscilloscope
- - Meter,noise level
- - Kg-84a
- - Amplifier,video
- - Radio set control group
- - Radio teletypewriter set
- - Speech equipment
- - Power supply
- - Recharging unit,carbon dioxide,pumping method
- - Satellite communica
- - Laboratory,petroleum,semitrailer mounted
- - Pump unit,centrifugal
- - Surveillance information processing center
- - Buffer,high speed
- - Processor,audio management system
- - Indicator,status
- - Bakery plant,trailer mounted
- - Filter unit,gas-particulate
- - Synthesizer,electrical frequency
- - Frequency standard
- - Multiplexer
- - Data distribution system
- - Tractor,full tracked,armored dozer-scraper combination
- - Air conditioner
- - Counter,automatic m
- - Processor,signal data
- - Terminal,telegraph
- - Meteorological data
- - Shelter,nonexpandable
- - Processor,communications
- - Test set,computer
- - Recharging unit,carbon dioxide,pumping method
- - Radio teletypewriter set
- - Distribution box
- - Dolly set,lift,transportable shelter
- - Tran maint facility
- - Generator,signal
- - Converter,signal data
- - Semitrailer,van
- - Recharging unit,carbon dioxide,pumping method
- - Communications term
- - Tower section set
- - Generator set,diesel engine
- - Semitrailer,tank transporter
- - Generator,signal
- - Communications term
- - Installation kit,electronic equipment
- - Modem,radio teletyp
- - Communications term
- - Mast,quick erect,ex
- - Tractor,wheeled,warehouse
- - Control-indicator
- - Tractor,wheeled,warehouse
- - Radio teletypewriter set
- - Tractor,wheeled,warehouse
- - Input-output unit
- - Mast
- - Air conditioner
- - Teletypewriter
- - Teletypewriter
- - Analyzer,spectrum
- - Oscilloscope
- - Power supply
- - Receiving set,radio
- - Accessories kit
- - Guy kit
- - Shelter,nonexpandable
- - Multiplexer
- - Modem radio
- - Electronic shop,semitrailer mounted
- - Power supply
- - Surveillance information processing center
- - Surveillance information processing center
- - Tower
- - Surveillance information processing center
- - Amplifier,radio frequency
- - Receiver-transmitter,radio
- - Antenna group
- - Radio teletypewriter set
- - Satellite communica
- - Surveillance information processing center
- - Plug-in unit,electrical-electronic test equipment
- - Radio teletypewriter set
- - Trailer,cargo
- - Installation kit,electronic equipment
- - Radio teletypewriter set
- - Telephone set
- - Communications control set
- - Receiver-transmitter,radio
- - Satellite relay station,ground tethered
- - Shelter,signal processing
- - Shelter,test operator
- - Satellite communication system
- - Relay facility,transportable
- - Counter,electronic,digital readout
- - Satellite communica
- - Shelter,communication,data link
- - Terminal,communicat
- - Antenna assembly
- - Deployment kit,satellite relay system,ground tethered
- - Communication system control group
- - Converter,telegraph-telephone signal
- - Telephone set
- - Generator set,gasoline engine
- - Satellite communica
- - Radio teletypewriter set
- - Surveillance information processing center
- - Surveillance information processing center
- - Surveillance information processing center
- - Display,optoelectronic
- - Surveillance information processing center
- - Radio teletypewriter set
- - Antenna group
- - Analyzer,electrical pulse
- - Surveillance information processing center
- - Multiplexer-demulti
- - Searchlight
- - Antenna group
- - Power supply
Availability for 7237703P042 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
7237703P042 / Screw,cap,hexagon headWhat is the formal definition of this item?
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
