Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 30453 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
2.000in. ⁓2-1/64"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
5.875in. ⁓5-7/8"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
hexagon
A measurement from the bottom to the top of the head,in distinction from depth.
0.469in. ⁓15/32"
0.875in.
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.625in. ⁓5/8"
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
18
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
19.0 rockwell c and 30.0 rockwell c
The stress at which a material exhibits a specified limiting deviation from the proportionality of stress or strain.
120000 pounds per square inch
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
sae grade 5 assn std all material responses
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unf
Answers.
Unf
18
Hexagon
2.000 inches
Right-hand
2a
FSC 5305 ⁓ Screws
NSN 5305-00-637-9535 SCREW,CAP,HEXAGON HEAD
unf thread series 18 thread quantity per inch hexagon head style 2.000" thread length right-hand 2a thread class
- NIIN
- 006379535
- NIIN Date
- 01/01/60
- Schedule B
- Name Code
- 18257
- FIIG
- A003B0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Germany
- - Italy
- - Norway
Availability for 30453 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- 50.0
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
30453 / Screw,cap,hexagon headWhat is the formal definition of this item?
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
