Serving our customers with quality and safety first.
2a
RIGHT-Hand
1.188in. ⁓1-13/64"
2.656in. and 2.750in. ⁓2-3/4"
hexagon
0.226in. and 0.243in. ⁓1/4"
0.551in. and 0.562in.
0.105in. first hole and 0.113in. first hole
0.375in. ⁓3/8"
16
120000 pounds per square inch
25.0 rockwell c and 34.0 rockwell c
2.490in. first hole and 2.604in. first hole
63.0 microinches threads
steel comp 1013 or steel comp 1015 or steel comp 1016 or steel comp 1017 or steel comp 1018 or steel comp 1019 or steel comp 1020 or steel comp 1021 or steel comp 1022 or steel comp 1023 or steel comp 1524 or steel comp 1025 or steel comp 1026 or steel comp 1527 or steel comp 1029 or steel comp 1030 or steel comp 1033 or steel comp 1034 or steel comp 1035 or steel comp 1536 or steel comp 1037 or steel comp 1038 or steel comp 1039 or steel comp 1040 or steel comp 1541
cadmium and chromate
QQ-P-416, type 2, class 2 fed spec single treatment response
unc
2 type and 10p style and 5 grade
Unc
Steel comp 1013 or steel comp 1015 or steel comp 1016 or steel comp 1017 or steel comp 1018 or steel comp 1019 or steel comp 1020 or steel comp 1021 or steel comp 1022 or steel comp 1023 or steel comp 1524 or steel comp 1025 or steel comp 1026 or steel comp 1527 or steel comp 1029 or steel comp 1030 or steel comp 1033 or steel comp 1034 or steel comp 1035 or steel comp 1536 or steel comp 1037 or steel comp 1038 or steel comp 1039 or steel comp 1040 or steel comp 1541
16
Hexagon
1.188 inches minimum
Right-hand
2a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
unc thread series cadmium surface treated 16 thread quantity per inch hexagon head style 1.188" thread length right-hand 2a thread class
1. | FF-S-85 | Cage 81348 |
2. | NASM51105 | Cage 80205 |
3. | MS51105-367 | Cage 80205 |
4. | MS51105-367 | Cage 96906 |
Nothing similar to this part number was found in our inventory
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.