Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 03176141424 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
9.312in. and 9.500in. ⁓9-1/2"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
9.312in. and 9.500in. ⁓9-1/2"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
hexagon
A measurement from the bottom to the top of the head,in distinction from depth.
0.455in. and 0.483in. ⁓31/64"
1.100in. and 1.125in.
The national stock number or the identification information of the end equipment for which the item is a part.
medium tactical vehicle replacement (mtvr) 2320-01-465-2174
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.750in. ⁓3/4"
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
10
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
SCREW-Cap, hexagon head, (finished hexagon bolt) steel, grade 5, UNC-2A
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
head shall be marked in accordance with MIL-HDBK-131; raised markings are preferred, stampings are acceptable
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
medium carbon steel, grade 5, in accordance with procurement specification FF-S-85, CAGE94231 mfr ref single material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
zinc
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-Z-328, TY11CL2 fed spec single treatment response
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.
amin. tensile STRENGTH-Lbs. 40, 100; dim across corners 1.254 min., 1.299 max.; radius 0.020 min., 0.045 max.; threads in accordance with screw thread standards for federal services, handbook H28
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc
The document designator of the specification or standard which established the item of supply.
94231-17614 manufacturers standard
A feature of the item of supply which must be specifically recorded when the reference number covers a range of items.
as differentiated by dimensions
Answers.
1EA
Unc
Steel
10
Hexagon
9.312 inches minimum and 9.500 inches maximum
Right-hand
2a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
NSN 5305-01-504-9781 SCREW,CAP,HEXAGON HEAD
Used on medium tactical vehicle replacement (mtvr) 2320-01-465-2174. unc thread series zinc surface treated head shall be marked in accordance with mil-hdbk-131; raised markings are preferred, stampings are acceptable screw-cap, hexagon head, (finished hexagon bolt) steel, grade 5, unc-2a 10 thread quantity per inch hexagon head style 9.312" thread length right-hand 2a thread class
- NIIN
- 015049781
- NIIN Date
- 02/14/03
- Schedule B
- 7318152000
- Name Code
- 18257
- FIIG
- A003B0
- QUP
- 1
- Historical Price
- $224.78 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 3HA509 | Cage 45152 |
| 2. | 3HA509 | Cage 75Q65 |
Major End Users Countries and entities
- - Department of The Navy
- - U.s. Marine Corps
Availability for 03176141424 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Bolts or nuts (iron or steel),(less than 35 feet)
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
03176141424 / Screw,cap,hexagon headWhat is the formal definition of this item?
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
