Serving our customers with quality and safety first.
2a
RIGHT-Hand
0.875in. ⁓7/8"
1.250in. ⁓1-1/4"
hexagon
0.195in. and 0.211in. ⁓7/32"
0.489in. and 0.500in.
0.312in. ⁓5/16"
24
120000 pounds per square inch
23.0 rockwell c and 32.0 rockwell c
steel
cadmium and chromate
unf
2 type and 10p style and 5 grade
Unf
Steel
24
Hexagon
0.875 inches minimum
Right-hand
2a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
unf thread series cadmium surface treated 24 thread quantity per inch hexagon head style 0.875" thread length right-hand 2a thread class
1. | 34699 | Cage 13841 |
2. | A10907 | Cage U4574 |
3. | MS90726-36 | Cage 80205 |
4. | 407430497 | Cage S5652 |
5. | 70008-36 | Cage 95097 |
6. | MS90726-36 | Cage 96906 |
7. | BACS12C636 | Cage 81205 |
8. | 5305002259091 | Cage SCY13 |
9. | MS90726-36 | Cage 80205 |
10. | 34699 | Cage 13841 |
11. | A10907 | Cage U4574 |
12. | 407430497 | Cage S5652 |
13. | MS90726-36 | Cage 96906 |
14. | 70008-36 | Cage 95097 |
15. | BACS12C636 | Cage 81205 |
16. | 5305002259091 | Cage SCY13 |
17. | MS90726-36 | Cage 80205 |
18. | 34699 | Cage 13841 |
19. | A10907 | Cage U4574 |
20. | 407430497 | Cage S5652 |
21. | MS90726-36 | Cage 96906 |
22. | 70008-36 | Cage 95097 |
23. | BACS12C636 | Cage 81205 |
24. | 5305002259091 | Cage SCY13 |
25. | MS90726-36 | Cage 80205 |
26. | 34699 | Cage 13841 |
27. | A10907 | Cage U4574 |
28. | 407430497 | Cage S5652 |
29. | MS90726-36 | Cage 96906 |
30. | 70008-36 | Cage 95097 |
31. | BACS12C636 | Cage 81205 |
32. | 5305002259091 | Cage SCY13 |
Nothing similar to this part number was found in our inventory
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.