Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. VA213-6-5 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
lh
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.617in. ⁓5/8"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flat fillister
A measurement from the bottom to the top of the head,in distinction from depth.
0.044in. and 0.056in. ⁓1/16"
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
0.312in. and 0.323in.
The length of a straight line which passes through the center of a circular tip,and terminates at the circumference.
0.207in.
The device by which the item is expanded and set.
break stem
A substance designed to provide a reduction of friction between the two surfaces in contact.
cetyl alcohol
A measurement of the longest dimension of the grip,in distinction from width.
0.251in. and 0.313in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
40
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
43.5 rockwell c bolt and 46.5 rockwell c bolt
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
43.5 rockwell c nut and 46.5 rockwell c nut
A designation that is used for the purpose of general identification of the thread.
0.188in. ⁓13/64"
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
fastener length given is installed dimension
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 304 sleeve
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 8740 bolt
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 8740 nut
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
AMS5639 assn std 3rd material response sleeve
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-S-6049 mil spec 1st material response bolt
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-S-6049 mil spec 2nd material response nut
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium bolt and chromate bolt
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium nut and chromate nut
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium sleeve
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
nas 672 national spec 1st treatment response bolt and QQ-P-416 fed spec 2nd treatment response bolt
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
nas 672 national spec 3rd treatment response nut and QQ-P-416 fed spec 4th treatment response nut
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416, type ii, class 3 fed spec 5th treatment response sleeve
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
uns
Answers.
Uns
Steel comp 8740 nut
Steel comp 8740 bolt
Steel comp 304 sleeve
40
0.251 inches minimum and 0.313 inches maximum
Flat fillister
Right-hand
Lh
Schedule B number: 7318230000
nmfc 106510
Rivets of iron or steel
FSC 5320 ⁓ Rivets
NSN 5320-01-077-0575 RIVET,BLIND
uns thread series cadmium sleeve surface treated fastener length given is installed dimension 40 thread quantity per inch 0.251" grip length flat fillister head style right-hand lh thread class
- NIIN
- 010770575
- NIIN Date
- 05/17/79
- Schedule B
- 7318230000
- Name Code
- 00864
- FIIG
- A040A0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- Historical Price
- $14.15 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | VA216-6-5 | Cage 98524 |
| 2. | BA213-6-5 | Cage 98524 |
Major End Users Countries and entities
- - Department of The Navy
- - Department of The Air Force
- - Poland
- - Brazil
- - Spain
- - Australia
- - Republic of Korea
Availability for VA213-6-5 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 50.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 106510 RIVETS I/S PLAIN/GALVANIZED ETC
- UFC (universal freight code)
- 54760
Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
VA213-6-5 / Rivet,blindWhat is the formal definition of this item?
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.
