V213-8-14 Blind Rivet

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

lh

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

1.220in. ⁓1-15/64"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

flat fillister

Head Height
A measurement from the bottom to the top of the head,in distinction from depth.

0.058in. and 0.070in. ⁓5/64"

Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

PIN-Rivet, tapered, threaded

Head Major Diameter

0.411in. and 0.421in.

Tip Diameter
The length of a straight line which passes through the center of a circular tip,and terminates at the circumference.

0.273in.

Expansion Device
The device by which the item is expanded and set.

break stem

Lubrication
A substance designed to provide a reduction of friction between the two surfaces in contact.

cetyl alcohol

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

0.814in. and 0.875in.

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

32

Hardness Rating
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.

43.5 rockwell c and 46.5 rockwell c bolt

Hardness Rating
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.

43.5 rockwell c and 46.5 rockwell c nut

Nominal Thread Size
A designation that is used for the purpose of general identification of the thread.

0.250in. ⁓1/4"

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

fastener length given is installed dimension

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 304 sleeve

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 8740 bolt

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 8740 nut

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

MIL-S-6049 mil spec 1st material response bolt

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

MIL-S-6049 mil spec 2nd material response nut

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

AMS5639 assn std 3rd material response sleeve

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium and chromate bolt

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium and chromate nut

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium sleeve

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

nas 672 national spec 1st treatment response and QQ-P-416 fed spec 2nd treatment response bolt

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

nas 672 national spec 3rd treatment response and QQ-P-416 fed spec 4th treatment response nut

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416, type ii, class 3 fed spec 5th treatment response sleeve

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

uns

V213-8-14

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Quality Commitment

Datasheet. V213-8-14 specification

Answers.

NSN 5320-01-221-6873 RIVET,BLIND

Availability for V213-8-14 A member of our team will provide you with a price and availability quote

Similar by Design Other rivets with similar characteristics

V213-8-14 / Rivet,blindWhat is the formal definition of this item?