Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. ST25D31-50-2 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3b
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.527in. and 0.530in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
blind rivet, nut and bolt (assembly)
0.590in.
The device by which the item is expanded and set.
threaded mandrel
A measurement of the longest dimension of the grip,in distinction from width.
0.125in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
16
A designation that is used for the purpose of general identification of the thread.
0.375in. ⁓3/8"
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.
125000 single pounds per square inch
The included angle of the countersink.
98.0 degrees and 102.0 degrees
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
furnished w/o bolt
A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.
annealed sleeve
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 431 expander
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 305 sleeve or steel comp 302 sleeve or steel comp XM-7 sleeve
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 5628 assn std single material response expander
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-S-763 fed spec 1st material response sleeve or QQ-S-763 fed spec 2nd material response sleeve or astm A-493 assn std 3rd material response sleeve
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium expander
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416 ty 1 cl 2 fed spec single treatment response expander
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjc
Answers.
Unjc
Steel comp 305 sleeve or steel comp 302 sleeve or steel comp xm-7 sleeve
Steel comp 431 expander
125000 single pounds per square inch
16
0.125 inches
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
Right-hand
3b
Schedule B number: 7318230000
nmfc 106510
Rivets of iron or steel
FSC 5320 ⁓ Rivets
NSN 5320-01-236-9228 RIVET,BLIND
unjc thread series cadmium expander surface treated furnished w/o bolt 125000 single pounds per square inch shear strength 16 thread quantity per inch 0.125" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style right-hand 3b thread class
- NIIN
- 012369228
- NIIN Date
- 07/24/86
- Schedule B
- 7318230000
- Name Code
- 00864
- FIIG
- A040A0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- Historical Price
- $51.33 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | BN360-616-2 | Cage 60516 |
| 2. | BN360-616-2 | Cage 73197 |
| 3. | BN360-616-2 | Cage L4528 |
| 4. | BN360-616-2 | Cage 2G586 |
Major End Users Countries and entities
- - Department of The Navy
- - Department of The Air Force
Availability for ST25D31-50-2 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 50.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 106510 RIVETS I/S PLAIN/GALVANIZED ETC
- UFC (universal freight code)
- 54760
Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
ST25D31-50-2 / Rivet,blindWhat is the formal definition of this item?
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.
