Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. SB310V6L22S specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
1.957in. and 1.982in. ⁓1-63/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.4470in. and 0.4475in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
0.7500in. and 0.8230in.
The device by which the item is expanded and set.
threaded stem
A substance designed to provide a reduction of friction between the two surfaces in contact.
solid film and cetyl alcohol
A measurement of the longest dimension of the grip,in distinction from width.
1.365in. and 1.380in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
24
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
15200 pounds per square inch
A designation that is used for the purpose of general identification of the thread.
0.375in. ⁓3/8"
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.
21000 double pounds per square inch
The included angle of the countersink.
102.0 degrees and 103.0 degrees
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 304 sleeve
The chemical compound or mechanical mixture properties of which the item is fabricated.
titanium alloy uns R56400 bolt
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 4928 assn std single material response bolt
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
IL-T-8504 mil spec 10th material response sleeve
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate bolt
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-35 fed spec single treatment response bolt
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
Answers.
Unjf
Titanium alloy uns r56400 bolt
Steel comp 304 sleeve
21000 double pounds per square inch
24
1.365 inches minimum and 1.380 inches maximum
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
Right-hand
3a
Schedule B number: 7318230000
Rivets of iron or steel
FSC 5320 ⁓ Rivets
NSN 5320-01-351-7994 RIVET,BLIND
unjf thread series passivate bolt surface treated 21000 double pounds per square inch shear strength 24 thread quantity per inch 1.365" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style right-hand 3a thread class
- NIIN
- 013517994
- NIIN Date
- 01/15/92
- Schedule B
- 7318230000
- Name Code
- 00864
- FIIG
- A040A0
- Item Weight
- 0.000lbs
- Item Dimensions
- QUP
- Historical Price
- $124.13 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 3D0091V-22 | Cage 88277 |
Major End Users Countries and entities
- - Department of The Air Force
Availability for SB310V6L22S A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
SB310V6L22S / Rivet,blindWhat is the formal definition of this item?
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.
