S7MLS100-M04-05U

S7MLS100M0405U Blind Rivet

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. S7MLS100-M04-05U specification

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

0.448in. ⁓29/64"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

0.029in.

Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

SELF-Plugging mechanically locked stem

Head Major Diameter

0.192in.

End Item Identification
The national stock number or the identification information of the end equipment for which the item is a part.

end item nsn: 1520-01-355-8250 AH-64D helicopter

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

0.385in.

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

510 pounds per square inch

Shear Strength
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.

1020 single pounds per square inch

Countersink Angle
The included angle of the countersink.

101.5 degrees and 98.5 degrees

Part Name Assigned By Controlling Agency
The name assigned to the item by the government agency or commercial organization controlling the design of the item.

rivet, blind, reduced head, flush

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

includes drive washer

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

nickel alloy sleeve

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel corrosion resisting locking ring or nickel alloy locking ring

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel corrosion resisting stem

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

ams 5737 assn std 1st material response locking ring or QQ-N-281 fed spec 2nd material response locking ring

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

ams 5737 assn std 1st material response stem

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

QQ-N-281 fed spec 1st material response sleeve

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate locking ring

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate stem

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-35 fed spec 1st treatment response locking ring

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-35 fed spec 1st treatment response stem

Answers.

What quantity is this sold in?

1EA

What material is the blind rivet made of ?

Steel corrosion resisting stem

What material is the blind rivet made of ?

Steel corrosion resisting locking ring or nickel alloy locking ring

What material is the blind rivet made of ?

Nickel alloy sleeve

What is the shear strength?

1020 single pounds per square inch

What is the grip length?

0.385 inches

What is the head style?

Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

What is the NSN for S7MLS100-M04-05U?

5320-01-533-4499

How is this classified for shipping?

Schedule B number: 7508900000
nmfc 096320
Other articles of nickel (excluding cloth, grill & netting of nickel wire)

What's the federal classification of S7MLS100-M04-05U?

FSC 5320 ⁓ Rivets

NSN 5320-01-533-4499 RIVET,BLIND

Used on end item nsn: 1520-01-355-8250 ah-64d helicopter. passivate stem surface treated includes drive washer rivet, blind, reduced head, flush 1020 single pounds per square inch shear strength 0.385" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style

NIIN
015334499
NIIN Date
09/15/05
Schedule B
7508900000 
Name Code
00864
FIIG
A040A0
Item Weight
0.000lbs
Item Dimensions
180 X 200 X 410
QUP
Historical Price
$147.55 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

1. HS5893S04-05U Cage 8V613

Major End Users Countries and entities

  • - Department of The Army 
  • - Republic of Korea 
  • - United Kingdom 
  • - Netherlands 

Availability for S7MLS100-M04-05U A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
77.5 
LCL (less than a car load rating)
Unknown
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Engineer supplies, other than those listed under code b. 
Commodity (for shipments via water)
Bolts or nuts (iron or steel),(less than 35 feet) 
NMFC (national motor freight code)
096320 RIVETS I/S NICKEL PLATED BUFFED 
UFC (universal freight code)
50430 

Similar by Design Other rivets with similar characteristics

Nothing similar to this part number was found in our inventory

S7MLS100-M04-05U / Rivet,blindWhat is the formal definition of this item?

An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.