Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. RV5033-6-2 specification
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.377in. ⁓25/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
A measurement from the bottom to the top of the head,in distinction from depth.
0.073in. and 0.083in. ⁓3/32"
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.186in. and 0.190in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
pull through hollow shank
0.537in. and 0.587in.
The device by which the item is expanded and set.
serrated STEM-Type w
A measurement of the longest dimension of the grip,in distinction from width.
0.063in. and 0.125in.
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
recommend drill size 10 (.1935)
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy 2117 sleeve
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel stem
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
chromate sleeve or anodize sleeve
Answers.
1EA
Steel stem
Aluminum alloy 2117 sleeve
0.063 inches minimum and 0.125 inches maximum
Err-090
Schedule B number: 7616103000
nmfc 106510
Aluminum rivets
FSC 5320 ⁓ Rivets
NSN 5320-00-789-2230 RIVET,BLIND
chromate sleeve or anodize sleeve surface treated recommend drill size 10 (.1935) 0.063" grip length
- NIIN
- 007892230
- NIIN Date
- 01/01/62
- Schedule B
- 7616103000
- Name Code
- 00864
- FIIG
- A040A0
- Item Weight
- 0.100lbs
- Item Dimensions
- 9999 X 9999 X 9999
- QUP
- 1
- Historical Price
- $2.23 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | RB5033C6-2 | Cage 98996 |
Major End Users Countries and entities
- - Department of The Air Force
Availability for RV5033-6-2 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 50.0
- LCL (less than a car load rating)
- 50.0
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
- Commodity (for shipments via water)
- Metal and metal products, nos, (less than 35 feet)
- NMFC (national motor freight code)
- 106510 RIVETS I/S PLAIN/GALVANIZED ETC
- UFC (universal freight code)
- 54760
Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
RV5033-6-2 / Rivet,blindWhat is the formal definition of this item?
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.
