PLT5210-8-6 Blind Rivet

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

hexagon

Head Height
A measurement from the bottom to the top of the head,in distinction from depth.

0.130in. and 0.135in. ⁓9/64"

Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

0.2580in. and 0.2600in.

The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

Expansion Device
The device by which the item is expanded and set.

break head

Lubrication
A substance designed to provide a reduction of friction between the two surfaces in contact.

cetyl alcohol or paraffin wax or dry film

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

0.345in. and 0.406in.

Width Across Flats
The shortest straight line between flats,perpendicular to the height.

0.367in. and 0.375in. ⁓3/8"

Features Provided
Those features,not otherwise specified,which may be required for proper functioning of the item.

drive nut

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

180000 pounds per square inch

Hardness Rating
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.

39.0 rockwell c bolt and 43.0 rockwell c bolt

Hardness Rating
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.

39.0 rockwell c nut and 43.0 rockwell c nut

Part Name Assigned By Controlling Agency
The name assigned to the item by the government agency or commercial organization controlling the design of the item.

fasteners

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

drive nut steel with corrosion retardent coating, color coded blue; locking FEATURE- three indentations located 120 deg apart on the periphery of the nut component

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 303 sleeve or steel comp 304 sleeve

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 4130 bolt or steel comp 4140 bolt or steel comp 8740 bolt

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 4130 nut or steel comp 4140 nut or steel comp 8740 nut

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

MIL-S-6758 mil spec 1st material response bolt or MIL-S-5626 mil spec 2nd material response bolt or MIL-S-6049 mil spec 3rd material response bolt

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

MIL-S-6758 mil spec 1st material response nut or MIL-S-5626 mil spec 2nd material response nut or MIL-S-6049 mil spec 3rd material response nut

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

QQ-S-763 fed spec 1st material response sleeve or AMS5639 assn std 2nd material response sleeve or AMS5641 assn std 3rd material response sleeve

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium bolt and chromate bolt

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium nut and chromate nut

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate sleeve and cadmium sleeve

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-35 fed spec 1st treatment response sleeve and QQ-P-416, ty 1, cl 3 fed spec 2nd treatment response sleeve

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416, ty 2, cl 2 fed spec single treatment response bolt

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416, ty 2, cl 2 fed spec single treatment response nut

PLT5210-8-6

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Quality Commitment

Datasheet. PLT5210-8-6 specification

Answers.

NSN 5320-01-492-4492 RIVET,BLIND

Major End Users Countries and entities

Availability for PLT5210-8-6 A member of our team will provide you with a price and availability quote

Similar by Design Other rivets with similar characteristics

PLT5210-8-6 / Rivet,blindWhat is the formal definition of this item?