Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. PLT214-6-9 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.965in. ⁓31/32"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
hexagon
A measurement from the bottom to the top of the head,in distinction from depth.
0.107in. ⁓7/64"
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.201in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
threaded SELF-Plugging shank w/sleeve
The device by which the item is expanded and set.
expander and threaded stem
A substance designed to provide a reduction of friction between the two surfaces in contact.
carbo wax or cetyl alcohol or paraffin wax
A measurement of the longest dimension of the grip,in distinction from width.
0.470in.
The shortest straight line between flats,perpendicular to the height.
0.309in. ⁓5/16"
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
40
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
2850 pounds per square inch
A designation that is used for the purpose of general identification of the thread.
0.130in. ⁓9/64"
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.
10500 double pounds per square inch
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 303 sleeve or steel comp 304 sleeve
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 4130 bolt or steel comp 4140 bolt or steel comp 8740 bolt
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 4130 nut or steel comp 4140 nut or steel comp 8740 nut
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-S-6758 mil spec 1st material response bolt or MIL-S-5626 fed std 1st material response bolt or MIL-S-6049 mil spec 1st material response bolt
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-S-6758 mil spec 1st material response nut or MIL-S-5626 fed std 1st material response nut or MIL-S-6049 mil spec 1st material response nut
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-S-763 fed spec single material response sleeve
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium bolt
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium nut
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium sleeve or passivate sleeve
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-S-5002 mil spec 3rd treatment response sleeve and QQ-P-416, type 1, class 3 fed spec 3rd treatment response sleeve
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416, type 11, class 2 fed spec 1st treatment response bolt
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416, type 11, class 2 fed spec 2nd treatment response nut
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unf
Answers.
1EA
Unf
Steel comp 4130 nut or steel comp 4140 nut or steel comp 8740 nut
Steel comp 4130 bolt or steel comp 4140 bolt or steel comp 8740 bolt
Steel comp 303 sleeve or steel comp 304 sleeve
10500 double pounds per square inch
40
0.470 inches
Hexagon
Right-hand
2a
Schedule B number: 7318230000
Rivets of iron or steel
FSC 5320 ⁓ Rivets
NSN 5320-01-387-9905 RIVET,BLIND
unf thread series cadmium sleeve or passivate sleeve surface treated 10500 double pounds per square inch shear strength 40 thread quantity per inch 0.470" grip length hexagon head style right-hand 2a thread class
- NIIN
- 013879905
- NIIN Date
- 03/17/94
- Schedule B
- 7318230000
- Name Code
- 00864
- FIIG
- A040A0
- QUP
- 1
- Historical Price
- $6.63 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - U.s. Coast Guard
Availability for PLT214-6-9 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
PLT214-6-9 / Rivet,blindWhat is the formal definition of this item?
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.
