Serving our customers with quality and safety first.
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
0.258in. and 0.260in.
threaded SELF-Plugging shank w/sleeve
0.499in. and 0.507in.
threaded stem
f/A-18 hornet
0.970in. and 1.031in.
99.0 degrees and 101.0 degrees
lubricants listed below may be applied to any or all components if required for performance: dry film lube MOS2, dag 250, molykote M-88, lauric acid, WWM-Carbo wax, cetyl alcohol, everlube 812 per MIL-L-81329 or paraffin wax.
steel comp 304 sleeve
titanium alloy uns R56400 bolt
titanium alloy uns R56400 nut
passivate sleeve
1EA
Titanium alloy uns r56400 nut
Titanium alloy uns r56400 bolt
Steel comp 304 sleeve
0.970 inches minimum and 1.031 inches maximum
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
Schedule B number: 8108908000
nmfc 106510
Other wrought titanium
FSC 5320 ⁓ Rivets
Used on f/a-18 hornet. passivate sleeve surface treated lubricants listed below may be applied to any or all components if required for performance: dry film lube MOS2, dag 250, molykote m-88, lauric acid, wwm-carbo wax, cetyl alcohol, everlube 812 per mil-l-81329 or paraffin wax. 0.970" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style
1. | BL170-8-16 | Cage 73197 |
2. | BL170-8-16 | Cage L4528 |
3. | ST3M782-4-16 | Cage 76301 |
4. | BL170-8-16 | Cage 73197 |
5. | BL170-8-16 | Cage L4528 |
6. | ST3M782-4-16 | Cage 76301 |
7. | BL170-8-16 | Cage 73197 |
8. | BL170-8-16 | Cage L4528 |
9. | ST3M782-4-16 | Cage 76301 |
Nothing similar to this part number was found in our inventory
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.