Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. PLT114-8-4 specification
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.2641in. and 0.2651in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
threaded SELF-Plugging shank w/sleeve
0.499in. and 0.507in.
The device by which the item is expanded and set.
threaded stem
A measurement of the longest dimension of the grip,in distinction from width.
0.220in. and 0.281in.
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
2100 pounds per square inch
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.
9000 double pounds per square inch
The included angle of the countersink.
99.0 degrees and 101.0 degrees
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 303 sleeve or steel comp 304 sleeve
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 4130 head or steel comp 4140 head or steel comp 8740 head
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 4130 nut or steel comp 4140 nut or steel comp 8740 nut
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-S-6758 mil spec 1st material response head or MIL-S-5626 mil spec 2nd material response head or MIL-S-6049 mil spec 3rd material response head
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-S-6758 mil spec 1st material response nut or MIL-S-5626 mil spec 2nd material response nut or MIL-S-6049 mil spec 3rd material response nut
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-S-763 fed spec 1st material response sleeve or AMS5639 assn std 1st material response sleeve or AMS5641 assn std 1st material response sleeve or QQ-S-763 fed spec 2nd material response sleeve or AMS5639 assn std 1st material response sleeve or AMS5641 assn std 1st material response sleeve
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium head
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium nut
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate sleeve and cadmium sleeve
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-S-5002 mil spec 1st treatment response sleeve and QQ-P-416, ty i, cls 3 fed spec 2nd treatment response sleeve
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416, ty ii, cls 2 fed spec single treatment response head
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416, ty ii, cls 2 fed spec single treatment response nut
Answers.
Steel comp 4130 nut or steel comp 4140 nut or steel comp 8740 nut
Steel comp 4130 head or steel comp 4140 head or steel comp 8740 head
Steel comp 303 sleeve or steel comp 304 sleeve
9000 double pounds per square inch
0.220 inches minimum and 0.281 inches maximum
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
Schedule B number: 7318230000
Rivets of iron or steel
FSC 5320 ⁓ Rivets
NSN 5320-01-251-0949 RIVET,BLIND
passivate sleeve surface treated 9000 double pounds per square inch shear strength 0.220" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style
- NIIN
- 012510949
- NIIN Date
- 03/12/87
- Schedule B
- 7318230000
- Name Code
- 00864
- FIIG
- A040A0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Canada
- - Netherlands
Availability for PLT114-8-4 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
PLT114-8-4 / Rivet,blindWhat is the formal definition of this item?
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.
