Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. PLT110-12-18 specification
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
2.102in. and 2.132in. ⁓2-9/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.3725in. and 0.3745in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
0.752in. and 0.762in.
The device by which the item is expanded and set.
serrated STEM-Type w
A measurement of the longest dimension of the grip,in distinction from width.
1.095in. and 1.156in.
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
180000 pounds per square inch
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
39.0 rockwell c body and 43.0 rockwell c body
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
39.0 rockwell c stem and 43.0 rockwell c stem
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.
19500 double pounds per square inch
The included angle of the countersink.
99.0 degrees and 101.0 degrees
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 303 sleeve or steel comp 304 sleeve
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 4130 stem or steel comp 4140 stem or steel comp 8740 stem
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 4130 body or steel comp 4140 body or steel comp 8740 body
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-S-6758 mil spec 1st material response body or MIL-S-5626 mil spec 2nd material response body or MIL-S-6049 mil spec 3rd material response body
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-S-6758 mil spec 1st material response stem or MIL-S-5626 mil spec 2nd material response stem or MIL-S-6049 mil spec 3rd material response stem
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-S-763 fed spec all material responses sleeve
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416 ty 1 cl 3 fed spec single treatment response sleeve
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416 ty 2 cl 2 fed spec single treatment response body
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416 ty 2 cl 2 fed spec single treatment response stem
Answers.
Steel comp 4130 body or steel comp 4140 body or steel comp 8740 body
Steel comp 4130 stem or steel comp 4140 stem or steel comp 8740 stem
Steel comp 303 sleeve or steel comp 304 sleeve
19500 double pounds per square inch
1.095 inches minimum and 1.156 inches maximum
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
Schedule B number: 7318230000
Rivets of iron or steel
FSC 5320 ⁓ Rivets
NSN 5320-01-292-5009 RIVET,BLIND
cadmium surface treated 19500 double pounds per square inch shear strength 1.095" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style
- NIIN
- 012925009
- NIIN Date
- 01/17/89
- Schedule B
- 7318230000
- Name Code
- 00864
- FIIG
- A040A0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Australia
Availability for PLT110-12-18 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
PLT110-12-18 / Rivet,blindWhat is the formal definition of this item?
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.
