Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. PLT110-10-24 specification
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
2.408in. ⁓2-27/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.310in. and 0.311in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
threaded SELF-Plugging shank w/sleeve
0.577in. and 0.635in.
The device by which the item is expanded and set.
threaded mandrel
A substance designed to provide a reduction of friction between the two surfaces in contact.
grease film or wax or cetyl alcohol
A measurement of the longest dimension of the grip,in distinction from width.
1.531in.
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
180000 pounds per square inch
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
39.0 rockwell c bolt and 43.0 rockwell c bolt
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
39.0 rockwell c nut and 43.0 rockwell c nut
The included angle of the countersink.
99.0 degrees and 101.0 degrees
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 303 sleeve or steel comp 304 sleeve
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 4130 bolt or steel comp 4140 bolt or steel comp 8740 bolt
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 4130 nut or steel comp 4140 nut or steel comp 8740 nut
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
astm A582 assn std 1st material response sleeve or ams 5639 assn std all material responses sleeve or ams 5641 assn std all material responses sleeve or QQ-S-763 fed spec 2nd material response sleeve
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-S-6758 mil spec 1st material response bolt or MIL-S-5626 mil spec 2nd material response bolt or MIL-S-6049 mil spec 3rd material response bolt
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-S-6758 mil spec 1st material response nut or MIL-S-5626 mil spec 2nd material response nut or MIL-S-6049 mil spec 3rd material response nut
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium bolt and chromate bolt
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium nut and chromate nut
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate sleeve and cadmium sleeve
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-35 fed spec 1st treatment response sleeve and QQ-P-416 ty 1 cl 3 fed spec 2nd treatment response sleeve
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416 ty 2 cl 2 fed spec single treatment response bolt
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416 TY2 cl 2 fed spec single treatment response nut
Answers.
Steel comp 4130 nut or steel comp 4140 nut or steel comp 8740 nut
Steel comp 4130 bolt or steel comp 4140 bolt or steel comp 8740 bolt
Steel comp 303 sleeve or steel comp 304 sleeve
1.531 inches
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
Schedule B number: 7318230000
nmfc 106510
Rivets of iron or steel
FSC 5320 ⁓ Rivets
NSN 5320-00-062-3168 RIVET,BLIND
passivate sleeve surface treated 1.531" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style
- NIIN
- 000623168
- NIIN Date
- 11/19/72
- Schedule B
- 7318230000
- Name Code
- 00864
- FIIG
- A040A0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Singapore
- - Republic of Korea
- - Turkey
Availability for PLT110-10-24 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 50.0
- LCL (less than a car load rating)
- 50.0
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal and metal products, nos, (less than 35 feet)
- NMFC (national motor freight code)
- 106510 RIVETS I/S PLAIN/GALVANIZED ETC
- UFC (universal freight code)
- 54760
Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
PLT110-10-24 / Rivet,blindWhat is the formal definition of this item?
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.
