Serving our customers with quality and safety first.
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
0.2016in. and 0.2026in.
0.2966in. and 0.3016in.
threaded stem
cetyl alcohol and wax and solid film
aircraft, hornet, f/A-18
0.157in. and 0.219in.
99.0 degrees and 101.0 degrees
steel comp 303 sleeve or steel comp 304 sleeve or steel comp 303se sleeve
steel comp 4130 bolt or steel comp 4140 bolt or steel comp 8740 bolt
steel comp 4130 nut or steel comp 4140 nut or steel comp 8740 nut
MIL-S-6758 mil spec single material response bolt or MIL-S-5626 mil spec single material response bolt or MIL-S-6049 mil spec single material response bolt
MIL-S-6758 mil spec single material response nut or MIL-S-5626 mil spec single material response nut or MIL-S-6049 mil spec single material response nut
QQ-S-763 fed spec single material response sleeve or ams 5639 assn std single material response sleeve or ams 5641 assn std single material response sleeve
cadmium bolt
cadmium nut
passivate sleeve and cadmium sleeve
MIL-S-5002 mil spec 1st treatment response sleeve and QQ-P-416, type i, class 3 fed spec 2nd treatment response sleeve
QQ-P-416, type ii, class 2 fed spec single treatment response nut
QQ-P-416, type ii, class 2 fed spec single treatment response bolt
Steel comp 4130 nut or steel comp 4140 nut or steel comp 8740 nut
Steel comp 4130 bolt or steel comp 4140 bolt or steel comp 8740 bolt
Steel comp 303 sleeve or steel comp 304 sleeve or steel comp 303se sleeve
0.157 inches minimum and 0.219 inches maximum
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
Schedule B number: 7318230000
nmfc 096320
Rivets of iron or steel
FSC 5320 ⁓ Rivets
Used on aircraft, hornet, f/a-18. passivate sleeve surface treated 0.157" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style
1. | 3M1188-3-3 | Cage 76301 |
2. | 10119022 | Cage A486G |
Nothing similar to this part number was found in our inventory
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.