PLT1028-8-8

PLT102888 Blind Rivet

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. PLT1028-8-8 specification

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

1.222in. ⁓1-15/64"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

0.289in. and 0.291in.

Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

blind rivet, nut and bolt (assembly)

Head Major Diameter

0.499in. and 0.507in.

Expansion Device
The device by which the item is expanded and set.

break stem

Lubrication
A substance designed to provide a reduction of friction between the two surfaces in contact.

cetyl alcohol, spec 305, HI-Shear corp or dry film

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

0.470in. and 0.531in.

Shear Strength
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.

11800 double pounds per square inch

Countersink Angle
The included angle of the countersink.

99.0 degrees and 101.0 degrees

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

used on T-38 talon

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

nickel alloy X-750 sleeve

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp H11 nut

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

ams 5667 assn std 2nd material response sleeve

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

ams 6487 assn std 1st material response nut

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium nut

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium sleeve

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

nas 672 fed spec 1st treatment response nut

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416, type i, class 3 fed spec 2nd treatment response sleeve

Answers.

What quantity is this sold in?

1EA

What material is the blind rivet made of ?

Steel comp h11 nut

What material is the blind rivet made of ?

Nickel alloy x-750 sleeve

What is the shear strength?

11800 double pounds per square inch

What is the grip length?

0.470 inches minimum and 0.531 inches maximum

What is the head style?

Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

What is the NSN for PLT1028-8-8?

5320-01-064-7635

How is this classified for shipping?

Schedule B number: 7508900000
nmfc 013630
Other articles of nickel (excluding cloth, grill & netting of nickel wire)

What's the federal classification of PLT1028-8-8?

FSC 5320 ⁓ Rivets

NSN 5320-01-064-7635 RIVET,BLIND

cadmium sleeve surface treated used on t-38 talon 11800 double pounds per square inch shear strength 0.470" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style

NIIN
010647635
NIIN Date
08/31/78
Schedule B
7508900000 
Name Code
00864
FIIG
A040A0
Item Weight
0.100lbs
Item Dimensions
--
QUP
Historical Price
$166.73 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
Metal content unknown
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Major End Users Countries and entities

  • - Department of The Navy 
  • - Department of The Air Force 
  • - Spain 
  • - Canada 
  • - Republic of Korea 

Availability for PLT1028-8-8 A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
70.0 
LCL (less than a car load rating)
70.0
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater 
Commodity (for shipments via water)
Metal and metal products, nos, (less than 35 feet) 
NMFC (national motor freight code)
013630 ALUM RIVETS 
UFC (universal freight code)
05720 

Similar by Design Other rivets with similar characteristics

Nothing similar to this part number was found in our inventory

PLT1028-8-8 / Rivet,blindWhat is the formal definition of this item?

An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.