PLT1012-8-12

PLT1012812 Blind Rivet
Home » Catalog » Fasteners (p. 3331) » Blind Rivets (p. 135) » Part Number PLT1012-8-12

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. PLT1012-8-12 specification

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

1.491in. and 1.537in. ⁓1-35/64"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

0.2890in. and 0.2910in.

Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

threaded SELF-Plugging shank w/sleeve

Head Major Diameter

0.507in.

Expansion Device
The device by which the item is expanded and set.

threaded stem

Lubrication
A substance designed to provide a reduction of friction between the two surfaces in contact.

carbo wax or grease film or cetyl alcohol or dry film

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

0.771in. and 0.821in.

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

200000 pounds per square inch

Hardness Rating
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.

39.0 rockwell c bolt and 43.0 rockwell c bolt

Hardness Rating
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.

39.0 rockwell c nut and 43.0 rockwell c nut

Countersink Angle
The included angle of the countersink.

99.0 degrees and 101.0 degrees

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 303 sleeve or steel comp 304 sleeve or steel comp 303se sleeve

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 4130 bolt or steel comp 4140 bolt or steel comp 8740 bolt

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 4130 nut or steel comp 4140 nut or steel comp 8740 nut

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

MIL-S-6758 mil spec 1st material response bolt or MIL-S-5626 mil spec 2nd material response bolt or MIL-S-6049 mil spec 3rd material response bolt

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

MIL-S-6758 mil spec 1st material response nut or MIL-S-5626 mil spec 2nd material response nut or MIL-S-6049 mil spec 3rd material response nut

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

QQ-S-763 fed spec 1st material response sleeve or ams 5639 assn std 2nd material response sleeve or ams 5641 assn std 3rd material response sleeve

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium bolt and chromate bolt and dichromate bolt

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium nut and chromate nut and dichromate nut

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate sleeve or cadmium sleeve

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

MIL-S-5002 mil spec 1st treatment response sleeve or QQ-P-416 ty 1 cl 3 fed spec 2nd treatment response sleeve

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416 ty 2 cl 2 fed spec 1st treatment response bolt and nas 672 assn std 2nd treatment response bolt and QQ-P-416 fed spec 3rd treatment response bolt

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416 ty 2 cl 2 fed spec 1st treatment response nut and nas 672 assn std 2nd treatment response nut and QQ-P-416 fed spec 3rd treatment response nut

Answers.

What material is the blind rivet made of ?

Steel comp 4130 nut or steel comp 4140 nut or steel comp 8740 nut

What material is the blind rivet made of ?

Steel comp 4130 bolt or steel comp 4140 bolt or steel comp 8740 bolt

What material is the blind rivet made of ?

Steel comp 303 sleeve or steel comp 304 sleeve or steel comp 303se sleeve

What is the grip length?

0.771 inches minimum and 0.821 inches maximum

What is the head style?

Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

What is the NSN for PLT1012-8-12?

5320-01-284-3400

How is this classified for shipping?

Schedule B number: 7318230000
Rivets of iron or steel

What's the federal classification of PLT1012-8-12?

FSC 5320 ⁓ Rivets

NSN 5320-01-284-3400 RIVET,BLIND

passivate sleeve or cadmium sleeve surface treated 0.771" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style

NIIN
012843400
NIIN Date
08/23/88
Schedule B
7318230000 
Name Code
00864
FIIG
A040A0
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
Metal content unknown
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

Major End Users Countries and entities

  • - Canada 

Availability for PLT1012-8-12 A member of our team will provide you with a price and availability quote

Request a Quote »

Similar by Design Other rivets with similar characteristics

Nothing similar to this part number was found in our inventory

PLT1012-8-12 / Rivet,blindWhat is the formal definition of this item?

An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.