OSMLSP0401C Blind Rivet

Datasheet. OSMLSP0401C specification

Identification Code Color
The application of color or a series of colors for the expressed purpose of identifying the specific functional design and/or the system application of an item.

yellow

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

0.198in. ⁓13/64"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

universal

Head Height
A measurement from the bottom to the top of the head,in distinction from depth.

0.054in. and 0.064in. ⁓5/64"

Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

0.139in. and 0.143in.

Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

SELF-Plugging mechanically locked stem

Head Major Diameter

0.238in. and 0.262in.

Expansion Device
The device by which the item is expanded and set.

serrated STEM-Type w

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

0.025in. and 0.062in.

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

675 pounds per square inch

Shear Strength
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.

1090 single pounds per square inch

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

nickel alloy K-500 sleeve or nickel alloy 502 sleeve

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

iron alloy 660 locking ring or nickel alloy K-500 locking ring or nickel alloy 502 locking ring

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

iron alloy 660 stem

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

ams 5737, uns S66286 assn std 1st material response locking ring or QQ-N-281, class a uns N05500 fed spec 2nd material response locking ring or QQ-N-281, class b uns N05502 fed spec 3rd material response locking ring

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

ams 5737, uns S66286 assn std single material response stem

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

QQ-N-281, class a uns N05500 fed spec 1st material response sleeve or QQ-N-281, class b uns N05502 fed spec 2nd material response sleeve

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium sleeve and chromate sleeve

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate stem

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-35 fed spec single treatment response stem

QQ-P-416, type 2, class 3 fed spec all treatment responses sleeve

Supplementary Features
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.

replaces NAS1919 appl

Specification/standard Data
The document designator of the specification or standard which established the item of supply.

81755-C9514 manufacturers specification control and 17446-osmlsp manufacturers standard

Answers.

What material is the blind rivet made of ?

Iron alloy 660 stem

What material is the blind rivet made of ?

Iron alloy 660 locking ring or nickel alloy k-500 locking ring or nickel alloy 502 locking ring

What material is the blind rivet made of ?

Nickel alloy k-500 sleeve or nickel alloy 502 sleeve

What is the shear strength?

1090 single pounds per square inch

What is the grip length?

0.025 inches minimum and 0.062 inches maximum

What is the head style?

Universal

What is the NSN for OSMLSP0401C?

5320-01-096-7003

How is this classified for shipping?

Schedule B number: 7508900000
Other articles of nickel (excluding cloth, grill & netting of nickel wire)

What's the federal classification of OSMLSP0401C?

FSC 5320 ⁓ Rivets

1.	OSMLSP-M04-01C	Cage C4293
2.	OSMLSP-M04-01C	Cage F6167
3.	OSMLSP-M04-01C	Cage 92215
4.	C9514M04-01	Cage 81755

OSMLSP0401C

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Quality Commitment

Datasheet. OSMLSP0401C specification

Answers.

NSN 5320-01-096-7003 RIVET,BLIND

Other Part Numbers Parts with same form, fit, and function by other manufacturers

Major End Users Countries and entities

Availability for OSMLSP0401C A member of our team will provide you with a price and availability quote

Similar by Design Other rivets with similar characteristics

OSMLSP0401C / Rivet,blindWhat is the formal definition of this item?