OBP-T08-09

OBPT0809 Blind Rivet

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. OBP-T08-09 specification

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

0.781in. ⁓25/32"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

flat chamfer

Head Height
A measurement from the bottom to the top of the head,in distinction from depth.

0.130in. and 0.140in. ⁓9/64"

Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

0.250in.

Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

straight

Head Major Diameter

0.400in. and 0.432in.

Expansion Device
The device by which the item is expanded and set.

serrated STEM-Type w

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

0.531in. and 0.595in.

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

3650 pounds per square inch

Shear Strength
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.

5900 single pounds per square inch

Part Name Assigned By Controlling Agency
The name assigned to the item by the government agency or commercial organization controlling the design of the item.

blind bolt fastener, high strength, PULL-Type, positive mechanical lock, protruding head

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 4027 sleeve or steel comp 4037 sleeve

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel mechanical lock or iron alloy 660 mechanical lock

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 8740 stem

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium mechanical lock or aluminum mechanical lock

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium sleeve or aluminum sleeve

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium stem or aluminum stem

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416, type 1, class 2 fed spec 1st treatment response mechanical lock or MIL-C-83488 mil spec 2nd treatment response mechanical lock

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416, type 1, class 3 fed spec 1st treatment response stem or MIL-C-83488 mil spec 2nd treatment response stem

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416, type 2, class 2 fed spec 1st treatment response sleeve or MIL-C-83488 mil spec 2nd treatment response sleeve

Answers.

What material is the blind rivet made of ?

Steel comp 8740 stem

What material is the blind rivet made of ?

Steel mechanical lock or iron alloy 660 mechanical lock

What material is the blind rivet made of ?

Steel comp 4027 sleeve or steel comp 4037 sleeve

What is the shear strength?

5900 single pounds per square inch

What is the grip length?

0.531 inches minimum and 0.595 inches maximum

What is the head style?

Flat chamfer

What is the NSN for OBP-T08-09?

5320-01-461-2944

How is this classified for shipping?

Schedule B number: 7318230000
Rivets of iron or steel

What's the federal classification of OBP-T08-09?

FSC 5320 ⁓ Rivets

NSN 5320-01-461-2944 RIVET,BLIND

cadmium stem or aluminum stem surface treated blind bolt fastener, high strength, pull-type, positive mechanical lock, protruding head 5900 single pounds per square inch shear strength 0.531" grip length flat chamfer head style

NIIN
014612944
NIIN Date
12/08/98
Schedule B
7318230000 
Name Code
00864
FIIG
A040A0
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
--
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

Availability for OBP-T08-09 A member of our team will provide you with a price and availability quote

Request a Quote »

Similar by Design Other rivets with similar characteristics

Nothing similar to this part number was found in our inventory

OBP-T08-09 / Rivet,blindWhat is the formal definition of this item?

An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.