OB100-T05-11D

OB100T0511D Blind Rivet

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. OB100-T05-11D specification

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

0.966in. ⁓31/32"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

0.179in.

Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

SELF-Plugging mechanically locked stem

Head Major Diameter

0.333in.

Expansion Device
The device by which the item is expanded and set.

serrated STEM-Type w

End Item Identification
The national stock number or the identification information of the end equipment for which the item is a part.

B-1B

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

0.842in.

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

3650 pounds per square inch

Countersink Angle
The included angle of the countersink.

99.0 degrees and 101.0 degrees

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 4027 sleeve or steel comp 4037 sleeve

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 8740 stem

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

AMS2301 assn std single material response sleeve

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

MIL-S-6049 mil spec single material response stem

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

aluminum sleeve

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

aluminum stem

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

MIL-C-83488 mil spec single treatment response sleeve

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

MIL-C-83488 mil spec single treatment response stem

Answers.

What material is the blind rivet made of ?

Steel comp 8740 stem

What material is the blind rivet made of ?

Steel comp 4027 sleeve or steel comp 4037 sleeve

What is the grip length?

0.842 inches

What is the head style?

Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

What is the NSN for OB100-T05-11D?

5320-01-406-3045

How is this classified for shipping?

Schedule B number: 7318230000
nmfc 013630
Rivets of iron or steel

What's the federal classification of OB100-T05-11D?

FSC 5320 ⁓ Rivets

NSN 5320-01-406-3045 RIVET,BLIND

Used on B-1B. aluminum stem surface treated 0.842" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style

NIIN
014063045
NIIN Date
12/29/94
Schedule B
7318230000 
Name Code
00864
FIIG
A040A0
Item Weight
0.000lbs
Item Dimensions
--
QUP
 
Historical Price
$17.05 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

Major End Users Countries and entities

  • - Department of The Air Force 

Availability for OB100-T05-11D A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
70.0 
LCL (less than a car load rating)
70.0
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft 
Commodity (for shipments via water)
Metal and metal products, nos, (less than 35 feet) 
NMFC (national motor freight code)
013630 ALUM RIVETS 
UFC (universal freight code)
05720 

Similar by Design Other rivets with similar characteristics

Nothing similar to this part number was found in our inventory

OB100-T05-11D / Rivet,blindWhat is the formal definition of this item?

An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.