Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. NAS9302E-4-07 specification
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.537in. ⁓35/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.125in. and 0.129in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
0.221in. and 0.229in.
The device by which the item is expanded and set.
serrated STEM-Type w
The national stock number or the identification information of the end equipment for which the item is a part.
FA-18 hornet
A measurement of the longest dimension of the grip,in distinction from width.
0.376in. and 0.437in.
The included angle of the countersink.
99.0 degrees and 101.0 degrees
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy 5056 sleeve
The chemical compound or mechanical mixture properties of which the item is fabricated.
iron alloy 660 locking ring or steel comp 304 locking ring
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 632 stem or iron alloy 660 stem
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 5657 assn std 1st material response stem or ams 5737 assn std 2nd material response stem
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 5731 assn std 1st material response locking ring or ams 5639 assn std 2nd material response locking ring
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-A-430 fed spec single material response sleeve
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium stem or passivate stem
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
chromate sleeve
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate locking ring
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-C-5541 mil spec single treatment response sleeve
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416 fed spec 1st treatment response stem or QQ-P-35 fed spec 2nd treatment response stem
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-35 fed spec single treatment response locking ring
Answers.
Steel comp 632 stem or iron alloy 660 stem
Iron alloy 660 locking ring or steel comp 304 locking ring
Aluminum alloy 5056 sleeve
0.376 inches minimum and 0.437 inches maximum
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
Schedule B number: 7616103000
nmfc 106510
Aluminum rivets
FSC 5320 ⁓ Rivets
NSN 5320-01-513-5220 RIVET,BLIND
Used on fa-18 hornet. passivate locking ring surface treated 0.376" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style
- NIIN
- 015135220
- NIIN Date
- 09/29/03
- Schedule B
- 7616103000
- Name Code
- 00864
- FIIG
- A040A0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- Historical Price
- $16.10 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
Availability for NAS9302E-4-07 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 50.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 106510 RIVETS I/S PLAIN/GALVANIZED ETC
- UFC (universal freight code)
- 54760
Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
NAS9302E-4-07 / Rivet,blindWhat is the formal definition of this item?
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.
