NAS1921M08S10PW

NAS1921M08S10PW Blind Rivet
Home » Catalog » Fasteners (p. 3017) » Blind Rivets (p. 115) » Part Number NAS1921M08S10PW

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. NAS1921M08S10PW specification

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

0.835in. ⁓27/32"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

0.249in. and 0.253in.

Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

SELF-Plugging mechanically locked stem

Head Major Diameter

0.480in.

Expansion Device
The device by which the item is expanded and set.

serrated STEM-Type w

Lubrication
A substance designed to provide a reduction of friction between the two surfaces in contact.

dry film

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

0.563in. and 0.625in.

Shear Strength
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.

4000 single pounds per square inch

Countersink Angle
The included angle of the countersink.

100.0 degrees

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

rivet may be slosh cleaned with MIL-C-38736 cleaner before installation; use with single action hand held installation tool

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

iron alloy 660 locking ring or nickel alloy 400 locking ring or nickel alloy R-405 locking ring

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

iron alloy 660 stem

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

nickel alloy 400 sleeve or nickel alloy R-405 sleeve

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

AMS5737 assn std 1st material response locking ring or QQ-N-281 fed spec 2nd material response locking ring or QQ-N-281 fed spec 3rd material response locking ring

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

AMS5737 assn std single material response stem

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

QQ-N-281 fed spec all material responses sleeve

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium sleeve and chromate sleeve or aluminum alloy sleeve

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate locking ring

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate stem

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-35 fed spec single treatment response locking ring

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-35 fed spec single treatment response stem

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416, ty 2, cl 3 fed spec 1st treatment response sleeve or NAS4006 assn std 2nd treatment response sleeve

Specification/standard Data
The document designator of the specification or standard which established the item of supply.

80205-NAS1921 professional/industrial association standard

Answers.

What material is the blind rivet made of ?

Nickel alloy 400 sleeve or nickel alloy r-405 sleeve

What material is the blind rivet made of ?

Iron alloy 660 stem

What material is the blind rivet made of ?

Iron alloy 660 locking ring or nickel alloy 400 locking ring or nickel alloy r-405 locking ring

What is the shear strength?

4000 single pounds per square inch

What is the grip length?

0.563 inches minimum and 0.625 inches maximum

What is the head style?

Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

What is the NSN for NAS1921M08S10PW?

5320-01-324-6202

How is this classified for shipping?

Schedule B number: 7508900000
Other articles of nickel (excluding cloth, grill & netting of nickel wire)

What's the federal classification of NAS1921M08S10PW?

FSC 5320 ⁓ Rivets

NSN 5320-01-324-6202 RIVET,BLIND

passivate stem surface treated rivet may be slosh cleaned with mil-c-38736 cleaner before installation; use with single action hand held installation tool 4000 single pounds per square inch shear strength 0.563" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style

NIIN
013246202
NIIN Date
08/19/90
Schedule B
7508900000 
Name Code
00864
FIIG
A040A0
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
Metal content unknown
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Major End Users Countries and entities

  • - Denmark 

Availability for NAS1921M08S10PW A member of our team will provide you with a price and availability quote

Request a Quote »

Similar by Design Other rivets with similar characteristics

Nothing similar to this part number was found in our inventory

NAS1921M08S10PW / Rivet,blindWhat is the formal definition of this item?

An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.