Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. NAS1921M06-06P specification
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.537in. ⁓35/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.186in. and 0.190in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
SELF-Plugging mechanically locked stem
0.357in.
The device by which the item is expanded and set.
serrated STEM-Type w
A substance designed to provide a reduction of friction between the two surfaces in contact.
dry film
A measurement of the longest dimension of the grip,in distinction from width.
0.313in. and 0.375in.
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.
2260 single pounds per square inch
The included angle of the countersink.
100.0 degrees
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
rivet may be slosh cleaned with MIL-C-38736 cleaner before installation
The chemical compound or mechanical mixture properties of which the item is fabricated.
iron alloy 660 locking ring or nickel alloy 400 locking ring or nickel alloy R-405 locking ring
The chemical compound or mechanical mixture properties of which the item is fabricated.
iron alloy 660 stem
The chemical compound or mechanical mixture properties of which the item is fabricated.
nickel alloy 400 sleeve or nickel alloy R-405 sleeve
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 5737 assn std 1st material response locking ring or QQ-N-281 fed spec 2nd material response locking ring or QQ-N-281 fed spec 3rd material response locking ring
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 5737 assn std single material response stem
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-N-281 fed spec all material responses sleeve
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate locking ring
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate stem
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-35 for A286 cres only fed spec single treatment response locking ring
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-35 fed spec single treatment response stem
The document designator of the specification or standard which established the item of supply.
80205-NAS1921 professional/industrial association standard
Answers.
Nickel alloy 400 sleeve or nickel alloy r-405 sleeve
Iron alloy 660 stem
Iron alloy 660 locking ring or nickel alloy 400 locking ring or nickel alloy r-405 locking ring
2260 single pounds per square inch
0.313 inches minimum and 0.375 inches maximum
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
Schedule B number: 7508900000
nmfc 139820
Other articles of nickel (excluding cloth, grill & netting of nickel wire)
FSC 5320 ⁓ Rivets
NSN 5320-01-059-1995 RIVET,BLIND
passivate stem surface treated rivet may be slosh cleaned with mil-c-38736 cleaner before installation 2260 single pounds per square inch shear strength 0.313" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style
- NIIN
- 010591995
- NIIN Date
- 04/08/78
- Schedule B
- 7508900000
- Name Code
- 00864
- FIIG
- A040A0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Belgium
- - Norway
- - Turkey
Availability for NAS1921M06-06P A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 85.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 139820 NICKEL BOLTS/NAILS/NUTS/RIVETS ETC
- UFC (universal freight code)
- 70220
Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
NAS1921M06-06P / Rivet,blindWhat is the formal definition of this item?
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.
