Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. NAS1921B06-07P specification
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.600in. ⁓39/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.186in. and 0.190in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
SELF-Plugging mechanically locked stem
0.357in.
The device by which the item is expanded and set.
serrated STEM-Type w
A substance designed to provide a reduction of friction between the two surfaces in contact.
dry film
A measurement of the longest dimension of the grip,in distinction from width.
0.376in. and 0.437in.
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.
1090 single pounds per square inch
The included angle of the countersink.
100.0 degrees
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
rivet may be slosh cleaned with MIL-C-38736 cleaner before installation
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy 2024 stem
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy 5056 locking ring
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy 5056 sleeve
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-A-430 fed spec single material response locking ring
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-A-430 fed spec single material response sleeve
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-A-430 fed spec single material response stem
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
anodize stem or chromate stem
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-A-8625 mil spec 1st treatment response stem or MIL-C-5541 mil spec 2nd treatment response stem
The document designator of the specification or standard which established the item of supply.
80205-NAS1921 professional/industrial association standard
Answers.
Aluminum alloy 5056 sleeve
Aluminum alloy 5056 locking ring
Aluminum alloy 2024 stem
1090 single pounds per square inch
0.376 inches minimum and 0.437 inches maximum
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
Schedule B number: 7616103000
nmfc 106510
Aluminum rivets
FSC 5320 ⁓ Rivets
NSN 5320-01-059-1993 RIVET,BLIND
anodize stem or chromate stem surface treated rivet may be slosh cleaned with mil-c-38736 cleaner before installation 1090 single pounds per square inch shear strength 0.376" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style
- NIIN
- 010591993
- NIIN Date
- 04/08/78
- Schedule B
- 7616103000
- Name Code
- 00864
- FIIG
- A040A0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Denmark
- - Norway
Availability for NAS1921B06-07P A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 50.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 106510 RIVETS I/S PLAIN/GALVANIZED ETC
- UFC (universal freight code)
- 54760
Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
NAS1921B06-07P / Rivet,blindWhat is the formal definition of this item?
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.
