Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. NAS1921B04-2 specification
Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.260in. ⁓17/64"
Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
universal
Head Height
A measurement from the bottom to the top of the head,in distinction from depth.
A measurement from the bottom to the top of the head,in distinction from depth.
0.054in. and 0.064in. ⁓5/64"
Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.124in. and 0.130in.
Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
SELF-Plugging mechanically locked stem
Head Major Diameter
0.238in. and 0.262in.
Expansion Device
The device by which the item is expanded and set.
The device by which the item is expanded and set.
serrated STEM-Type w
Grip Length
A measurement of the longest dimension of the grip,in distinction from width.
A measurement of the longest dimension of the grip,in distinction from width.
0.063in. and 0.125in.
Material
The chemical compound or mechanical mixture properties of which the item is fabricated.
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy 2024 sleeve
Material
The chemical compound or mechanical mixture properties of which the item is fabricated.
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy 2024 stem
Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-A-430 fed spec single material response sleeve
Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-A-430 fed spec single material response stem
Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
anodize sleeve
Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
anodize stem
Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-A-8625 mil spec 1st treatment response sleeve
Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-A-8625 mil spec 1st treatment response stem
Answers.
What material is the blind rivet made of ?
Aluminum alloy 2024 stem
What material is the blind rivet made of ?
Aluminum alloy 2024 sleeve
What is the grip length?
0.063 inches minimum and 0.125 inches maximum
What is the head style?
Universal
How is this classified for shipping?
Schedule B number: 7616103000
nmfc 106510
Aluminum rivets
What's the federal classification of NAS1921B04-2?
FSC 5320 ⁓ Rivets
NSN 5320-00-150-4092 RIVET,BLIND
anodize stem surface treated 0.063" grip length universal head style
- NIIN
- 001504092
- NIIN Date
- 09/08/70
- Schedule B
- 7616103000
- Name Code
- 00864
- FIIG
- A040A0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- Historical Price
- $2.23 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | NAS1919B04-02 | Cage 80205 |
| 2. | MLSP-804-02 | Cage 0HDW7 |
| 3. | MLSPB04-02 | Cage 0HDW7 |
| 4. | GR500L4-2 | Cage 26512 |
| 5. | 54217-4-02 | Cage F5442 |
| 6. | MLSP-B04-02 | Cage F6167 |
| 7. | 54217-4-02 | Cage F0210 |
| 8. | MLSP-804-02 | Cage 17446 |
| 9. | MLSPB04-02 | Cage 17446 |
| 10. | NAS1919B04-02 | Cage 0HDW7 |
| 11. | NAS1919B04-02 | Cage 17446 |
| 12. | MLSP-804-02 | Cage 29666 |
| 13. | MLSPB4-2 | Cage 29666 |
| 14. | MLSPB04-02 | Cage 29666 |
Major End Users Countries and entities
- - Department of The Navy
- - Department of The Army
- - Department of The Air Force
- - U.s. Marine Corps
- - U.s. Coast Guard
- - Poland
- - Brazil
- - Spain
- - Singapore
- - Malaysia
- - Australia
- - Belgium
- - New Zealand
- - France
- - Germany
- - Republic of Korea
- - United Kingdom
- - Netherlands
- - Portugal
- - Denmark
- - Norway
- - Greece
- - Turkey
Availability for NAS1921B04-2 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 50.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 106510 RIVETS I/S PLAIN/GALVANIZED ETC
- UFC (universal freight code)
- 54760
Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
NAS1921B04-2 / Rivet,blindWhat is the formal definition of this item?
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.
