Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. NAS1919B05S07FC specification
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
1.102in. ⁓1-7/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
universal
A measurement from the bottom to the top of the head,in distinction from depth.
0.067in. and 0.077in. ⁓5/64"
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.1550in. and 0.1595in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
SELF-Plugging mechanically locked stem
0.296in. and 0.328in.
The national stock number or the identification information of the end equipment for which the item is a part.
1430-01-448-9834
A measurement of the longest dimension of the grip,in distinction from width.
0.376in. and 0.437in.
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
for use with single action, hand held installation tools or in automated installation equipment, marked with a depressed "s" on spindle head or coded yellow on spindle
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy 2024 stem
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy 5056 locking ring
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy 5056 sleeve
Answers.
Aluminum alloy 5056 sleeve
Aluminum alloy 5056 locking ring
Aluminum alloy 2024 stem
0.376 inches minimum and 0.437 inches maximum
Universal
FSC 5320 ⁓ Rivets
NSN 5320-01-629-2986 RIVET,BLIND
Used on 1430-01-448-9834. for use with single action, hand held installation tools or in automated installation equipment, marked with a depressed "s" on spindle head or coded yellow on spindle 0.376" grip length universal head style
- NIIN
- 016292986
- NIIN Date
- 06/25/14
- Schedule B
- Name Code
- 00864
- FIIG
- A040A0
- DEMIL / ITAR
- Uncontrolled item (Code )
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- --
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Army
Availability for NAS1919B05S07FC A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 50.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Metal and metal products, nos, (less than 35 feet)
- NMFC (national motor freight code)
- 106510 RIVETS I/S PLAIN/GALVANIZED ETC
- UFC (universal freight code)
- 54760
Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
NAS1919B05S07FC / Rivet,blindWhat is the formal definition of this item?
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.
