NAS1752-6L14

NAS17526L14 Blind Rivet

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. NAS1752-6L14 specification

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

1.614in. ⁓1-5/8"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

0.388in. and 0.390in.

Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

threaded SELF-Plugging shank w/sleeve

Head Major Diameter

0.752in. and 0.762in.

Expansion Device
The device by which the item is expanded and set.

threaded stem

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

0.845in. and 0.906in.

Features Provided
Those features,not otherwise specified,which may be required for proper functioning of the item.

SELF-Locking

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

5600 pounds per square inch

Hardness Rating
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.

30.0 rockwell c and 45.0 rockwell c

Shear Strength
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.

15750 double pounds per square inch

Countersink Angle
The included angle of the countersink.

99.0 degrees and 101.0 degrees

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

restricted usage. for repair only. 1/64" oversize

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

iron alloy 660

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

ams 5731 assn std 1st material response or ams 5732 assn std 2nd material response or ams 5737 assn std 3rd material response

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

MIL-S-5002 mil spec single treatment response

Specification/standard Data
The document designator of the specification or standard which established the item of supply.

80205-NAS1752 professional/industrial association standard

Answers.

What quantity is this sold in?

1EA

What material is the blind rivet made of ?

Iron alloy 660

What is the shear strength?

15750 double pounds per square inch

What is the grip length?

0.845 inches minimum and 0.906 inches maximum

What is the head style?

Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

What is the NSN for NAS1752-6L14?

5320-01-387-3741

How is this classified for shipping?

Schedule B number: 7318230000
nmfc 096320
Rivets of iron or steel

What's the federal classification of NAS1752-6L14?

FSC 5320 ⁓ Rivets

NSN 5320-01-387-3741 RIVET,BLIND

passivate surface treated restricted usage. for repair only. 1/64" oversize 15750 double pounds per square inch shear strength 0.845" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style

NIIN
013873741
NIIN Date
03/03/94
Schedule B
7318230000 
Name Code
00864
FIIG
A040A0
Item Weight
0.100lbs
Item Dimensions
--
QUP
Historical Price
$103.28 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Major End Users Countries and entities

  • - Department of The Air Force 
  • - Department of The Navy 
  • - Spain 

Availability for NAS1752-6L14 A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
77.5 
LCL (less than a car load rating)
Unknown
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater 
Commodity (for shipments via water)
Metal hardware 
NMFC (national motor freight code)
096320 RIVETS I/S NICKEL PLATED BUFFED 
UFC (universal freight code)
50430 

Similar by Design Other rivets with similar characteristics

Nothing similar to this part number was found in our inventory

NAS1752-6L14 / Rivet,blindWhat is the formal definition of this item?

An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.