NAS1750-4L11

NAS17504L11 Blind Rivet

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. NAS1750-4L11 specification

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

0.804in. and 0.834in. ⁓27/32"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

0.274in. and 0.276in.

Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

threaded SELF-Plugging shank w/sleeve

Head Major Diameter

0.463in. and 0.507in.

Expansion Device
The device by which the item is expanded and set.

threaded stem

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

0.656in. and 0.719in.

Hardness Rating
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.

39.0 rockwell c and 43.0 rockwell c

Shear Strength
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.

9000 double pounds per square inch

Countersink Angle
The included angle of the countersink.

99.0 degrees and 101.0 degrees

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

SELF-Locking

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 303f sleeve

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 4140 bolt or steel comp 8740 bolt or steel comp 4130 bolt

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 4140 nut or steel comp 8740 nut or steel comp 4130 nut

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

ams 5641 assn std single material response sleeve

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

MIL-S-5626 mil spec 1st material response bolt or MIL-S-6049 mil spec 2nd material response bolt or MIL-S-6758 mil spec 3rd material response bolt

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

MIL-S-5626 mil spec 1st material response nut or MIL-S-6049 mil spec 2nd material response nut or MIL-S-6758 mil spec 3rd material response nut

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium body

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium sleeve

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium stem

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416, ty 1, cl 3 fed spec single treatment response sleeve

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416, ty 2, cl 3 fed spec single treatment response body

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416, ty 2, cl 3 fed spec single treatment response stem

Specification/standard Data
The document designator of the specification or standard which established the item of supply.

80205-NAS1750 professional/industrial association standard

Answers.

What material is the blind rivet made of ?

Steel comp 4140 nut or steel comp 8740 nut or steel comp 4130 nut

What material is the blind rivet made of ?

Steel comp 4140 bolt or steel comp 8740 bolt or steel comp 4130 bolt

What material is the blind rivet made of ?

Steel comp 303f sleeve

What is the shear strength?

9000 double pounds per square inch

What is the grip length?

0.656 inches minimum and 0.719 inches maximum

What is the head style?

Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

What is the NSN for NAS1750-4L11?

5320-00-436-3420

How is this classified for shipping?

Schedule B number: 7318230000
nmfc 013630
Rivets of iron or steel

What's the federal classification of NAS1750-4L11?

FSC 5320 ⁓ Rivets

NSN 5320-00-436-3420 RIVET,BLIND

cadmium stem surface treated self-locking 9000 double pounds per square inch shear strength 0.656" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style

NIIN
004363420
NIIN Date
09/03/69
Schedule B
7318230000 
Name Code
00864
FIIG
A040A0
Item Weight
0.000lbs
Item Dimensions
--
QUP
 
Historical Price
$9.88 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
Metal content unknown
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

1. BAV8A11F Cage C4293
2. PLT111-8-11 Cage C4293
3. PLT111-8-11 Cage 92215
4. 3M82-8-11 Cage 76301
5. BAV8A11F Cage 92215
6. PLT111-8-11 Cage 98524

Major End Users Countries and entities

  • - Spain 
  • - Canada 
  • - France 
  • - Germany 
  • - Republic of Korea 
  • - Greece 
  • - Turkey 

Availability for NAS1750-4L11 A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
70.0 
LCL (less than a car load rating)
Unknown
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater 
Commodity (for shipments via water)
Metal hardware 
NMFC (national motor freight code)
013630 ALUM RIVETS 
UFC (universal freight code)
05720 

Similar by Design Other rivets with similar characteristics

Nothing similar to this part number was found in our inventory

NAS1750-4L11 / Rivet,blindWhat is the formal definition of this item?

An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.