Serving our customers with quality and safety first.
0.475in. ⁓31/64"
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
0.186in. and 0.190in.
0.238in. and 0.349in.
serrated STEM-Type w
0.251in. and 0.312in.
1020 single pounds per square inch
99.0 degrees and 101.0 degrees
H-38 strain hardened locking ring
aluminum alloy 5056 expander
QQ-A-430 fed spec single material response locking ring
anodize or chromate
MIL-A-8625 mil spec 1st treatment response or MIL-C-5541 mil spec 2nd treatment response
80205-NAS1399 professional/industrial association standard
Aluminum alloy 5056 expander
1020 single pounds per square inch
0.251 inches minimum and 0.312 inches maximum
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
FSC 5320 ⁓ Rivets
anodize or chromate surface treated 1020 single pounds per square inch shear strength 0.251" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style
1. | RV1201-6-5 | Cage C4293 |
2. | RV1201-6-5 | Cage 53551 |
3. | 3M1235D6-5 | Cage 76301 |
4. | RV1201-6-5 | Cage 92215 |
5. | CR2172-6-5 | Cage 11815 |
6. | RV1301-6-5 | Cage 53551 |
7. | RV1341D6-5 | Cage 11815 |
8. | RV1341D6-5 | Cage 53551 |
9. | RV1201-6-5 | Cage 98996 |
Nothing similar to this part number was found in our inventory
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.