MS90354U0813 Blind Rivet

Datasheet. MS90354U0813 specification

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

1.031in. ⁓1-1/32"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

tapered pan

Head Height
A measurement from the bottom to the top of the head,in distinction from depth.

0.130in. and 0.140in. ⁓9/64"

Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

0.258in. and 0.260in.

Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

SELF-Plugging mechanically locked stem

Head Major Diameter

0.400in. and 0.432in.

Expansion Device
The device by which the item is expanded and set.

serrated STEM-Type w

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

0.781in. and 0.845in.

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

3650 pounds per square inch

Hardness Rating
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.

326.0 knoop sleeve and 466.0 knoop sleeve

Hardness Rating
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.

48.0 rockwell c stem and 53.0 rockwell c stem

Shear Strength
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.

5900 single pounds per square inch

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 1010 mechanical lock or steel comp 1020 mechanical lock or steel comp 1144 mechanical lock or steel comp 4037 mechanical lock or steel comp 4130 mechanical lock or iron alloy 660 mechanical lock or steel comp 316 mechanical lock

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel sleeve

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel stem

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

66 fed std 1st material response mechanical lock or 66 fed std 2nd material response mechanical lock or 66 fed std 3rd material response mechanical lock or 66 fed std 4th material response mechanical lock or 66 fed std 5th material response mechanical lock or ams 5737 assn std 6th material response mechanical lock or ams 5690 assn std 7th material response mechanical lock

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

astm A331 assn std single material response stem

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

astm A331 assn std single material response sleeve

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium mechanical lock and chromate mechanical lock or passivate mechanical lock

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium sleeve and chromate sleeve

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium stem

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416, ty 1, cl 3 fed spec single treatment response stem

QQ-P-416, ty 2, cl 2 fed spec 1st treatment response mechanical lock or QQ-P-35 fed spec 2nd treatment response mechanical lock

QQ-P-416, ty 2, cl 2 fed spec single treatment response sleeve

Answers.

What material is the blind rivet made of ?

Steel stem

What material is the blind rivet made of ?

Steel sleeve

What material is the blind rivet made of ?

Steel comp 1010 mechanical lock or steel comp 1020 mechanical lock or steel comp 1144 mechanical lock or steel comp 4037 mechanical lock or steel comp 4130 mechanical lock or iron alloy 660 mechanical lock or steel comp 316 mechanical lock

What is the shear strength?

5900 single pounds per square inch

What is the grip length?

0.781 inches minimum and 0.845 inches maximum

What is the head style?

Tapered pan

What is the NSN for MS90354U0813?

5320-01-324-0150

How is this classified for shipping?

Schedule B number: 7318230000
nmfc 106510
Rivets of iron or steel

What's the federal classification of MS90354U0813?

FSC 5320 ⁓ Rivets

MS90354U0813

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Quality Commitment

Datasheet. MS90354U0813 specification

Answers.

NSN 5320-01-324-0150 RIVET,BLIND

Major End Users Countries and entities

Availability for MS90354U0813 A member of our team will provide you with a price and availability quote

Shipping Information

Similar by Design Other rivets with similar characteristics

MS90354U0813 / Rivet,blindWhat is the formal definition of this item?