Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. MS90354U0512 specification
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.844in. ⁓27/32"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
tapered pan
A measurement from the bottom to the top of the head,in distinction from depth.
0.062in. and 0.070in. ⁓5/64"
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.162in. and 0.164in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
0.250in. and 0.272in.
The device by which the item is expanded and set.
serrated STEM-Type w
A measurement of the longest dimension of the grip,in distinction from width.
0.719in. and 0.782in.
Those features,not otherwise specified,which may be required for proper functioning of the item.
SELF-Locking
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
1350 pounds per square inch
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
48.0 rockwell c stem and 53.0 rockwell c stem
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.
2340 single pounds per square inch
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 1010 mechanical lock or steel comp 1020 mechanical lock or steel comp 1144 mechanical lock or steel comp 4037 mechanical lock or steel comp 4130 mechanical lock
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 4027 sleeve or steel comp 4037 sleeve
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 8740 stem
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
66 fed std all material responses mechanical lock
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
astm A331, uns G40270 assn std 1st material response sleeve or astm A331, uns G40370 assn std 2nd material response sleeve
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
astm A331, uns G87400 assn std single material response stem
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium mechanical lock and chromate mechanical lock
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium sleeve and chromate sleeve
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium stem
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416, type 2, class 2 fed spec all treatment responses mechanical lock
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416, type 2, class 2 fed spec all treatment responses sleeve
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416, type 1, class 3 fed spec single treatment response stem
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.
u/w installation tooling MIL-F-81177, appendix a
The document designator of the specification or standard which established the item of supply.
96906-MS90354 government standard and 17446-UBP-T manufacturers standard
Answers.
Steel comp 8740 stem
Steel comp 4027 sleeve or steel comp 4037 sleeve
Steel comp 1010 mechanical lock or steel comp 1020 mechanical lock or steel comp 1144 mechanical lock or steel comp 4037 mechanical lock or steel comp 4130 mechanical lock
2340 single pounds per square inch
0.719 inches minimum and 0.782 inches maximum
Tapered pan
Schedule B number: 7318230000
nmfc 106510
Rivets of iron or steel
FSC 5320 ⁓ Rivets
NSN 5320-01-258-8256 RIVET,BLIND
cadmium stem surface treated 2340 single pounds per square inch shear strength 0.719" grip length tapered pan head style
- NIIN
- 012588256
- NIIN Date
- 07/08/87
- Schedule B
- 7318230000
- Name Code
- 00864
- FIIG
- A040A0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- Historical Price
- $6.93 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | UBP-T05-12 | Cage 0HDW7 |
| 2. | CR7310U5-12 | Cage 11815 |
| 3. | UBP-T05-12 | Cage 17446 |
| 4. | UBP-T5-12 | Cage 17446 |
| 5. | UBP-T5-12 | Cage 80539 |
Major End Users Countries and entities
- - Department of The Navy
- - Department of The Air Force
- - U.s. Coast Guard
- - Poland
- - Brazil
- - Spain
- - Singapore
- - Australia
- - United Kingdom
- - Netherlands
- - Denmark
- - Norway
- - Greece
- - Turkey
Availability for MS90354U0512 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 50.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 106510 RIVETS I/S PLAIN/GALVANIZED ETC
- UFC (universal freight code)
- 54760
Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
MS90354U0512 / Rivet,blindWhat is the formal definition of this item?
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.
