Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. MS90354U0504D specification
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.405in. ⁓13/32"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flat fillister w/protruding stud
A measurement from the bottom to the top of the head,in distinction from depth.
0.062in. and 0.070in. ⁓5/64"
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.844in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
The national stock number or the identification information of the end equipment for which the item is a part.
auxiliary scoop ins f/A-18E model code to support ecp 6038
A measurement of the longest dimension of the grip,in distinction from width.
0.875in.
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
fastener, blind, high strength, pull type, positive mechanical lock, protruding head, alloy steel, 112 k.s.i. fsu
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
sleeve and serated PIN-Alloy steel per ASTM-A-331. mechanical lock: carbon steel or alloy steel conforming to the chemical of 1010, 1020, 1144, 4037, or 4130 of federal standard 66 or A286 cres conforming to the chemical limits of ams 5737, or type 316 cres conforming to the chemical requirements of AMS5690. MS90354 has been replaced by NASM90354 dated june 29, 2000.
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel sleeve
Answers.
Steel sleeve
0.875 inches
Flat fillister w/protruding stud
Schedule B number: 7318230000
nmfc 106510
Rivets of iron or steel
FSC 5320 ⁓ Rivets
NSN 5320-01-510-6613 RIVET,BLIND
Used on auxiliary scoop ins f/a-18e model code to support ecp 6038. sleeve fastener, blind, high strength, pull type, positive mechanical lock, protruding head, alloy steel, 112 k.s.i. fsu 0.875" grip length flat fillister w/protruding stud head style
- NIIN
- 015106613
- NIIN Date
- 07/24/03
- Schedule B
- 7318230000
- Name Code
- 00864
- FIIG
- A040A0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- Historical Price
- $35.00 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
- - Australia
Availability for MS90354U0504D A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 50.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 106510 RIVETS I/S PLAIN/GALVANIZED ETC
- UFC (universal freight code)
- 54760
Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
MS90354U0504D / Rivet,blindWhat is the formal definition of this item?
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.
