Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. MS90353U0609D specification
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.916in. ⁓59/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.197in. and 0.199in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
SELF-Plugging mechanically locked stem
0.386in.
The device by which the item is expanded and set.
serrated STEM-Type w
The national stock number or the identification information of the end equipment for which the item is a part.
vertical stabilizer; f/A-18E/f hornet aircraft
A measurement of the longest dimension of the grip,in distinction from width.
0.531in. and 0.595in.
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
2100 pounds per square inch
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
326.0 knoop sleeve and 466.0 knoop sleeve
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
48.0 rockwell c stem and 53.0 rockwell c stem
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.
3450 single pounds per square inch
The included angle of the countersink.
99.0 degrees and 101.0 degrees
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 1010 mechanical lock or steel comp 1020 mechanical lock or steel comp 1044 mechanical lock or steel comp 4037 mechanical lock or steel comp 4130 mechanical lock
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel sleeve
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel stem
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
66 fed std 1st material response mechanical lock or ams A286 assn std 2nd material response mechanical lock or ams 5737 assn std 3rd material response mechanical lock or ams 5690 assn std 4th material response mechanical lock
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ASTM-A-331 assn std single material response sleeve
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ASTM-A-331 assn std single material response stem
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
aluminum
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-C-83488 mil spec single treatment response
The document designator of the specification or standard which established the item of supply.
96906-MS90353 government specification
Answers.
Steel stem
Steel sleeve
Steel comp 1010 mechanical lock or steel comp 1020 mechanical lock or steel comp 1044 mechanical lock or steel comp 4037 mechanical lock or steel comp 4130 mechanical lock
3450 single pounds per square inch
0.531 inches minimum and 0.595 inches maximum
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
Schedule B number: 7318230000
nmfc 095190
Rivets of iron or steel
FSC 5320 ⁓ Rivets
NSN 5320-01-472-4272 RIVET,BLIND
Used on vertical stabilizer;f/a-18e/f hornet aircraft. aluminum surface treated 3450 single pounds per square inch shear strength 0.531" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style
- NIIN
- 014724272
- NIIN Date
- 03/02/00
- Schedule B
- 7318230000
- Name Code
- 00864
- FIIG
- A040A0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- Historical Price
- $35.25 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
- - Australia
Availability for MS90353U0609D A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 095190 HARDWARE, NOI
- UFC (universal freight code)
- 49790
Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
MS90353U0609D / Rivet,blindWhat is the formal definition of this item?
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.
