MS90353S0611D

MS90353S0611D Blind Rivet
Home » Catalog » Fasteners (p. 1840) » Blind Rivets (p. 67) » Part Number MS90353S0611D

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. MS90353S0611D specification

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

1.041in. ⁓1-3/64"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

0.197in. and 0.199in.

Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

SELF-Plugging mechanically locked stem

Head Major Diameter

0.386in.

Expansion Device
The device by which the item is expanded and set.

serrated STEM-Type w

End Item Identification
The national stock number or the identification information of the end equipment for which the item is a part.

aircraft, F16

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

0.656in. and 0.720in.

Hardness Rating
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.

326.0 knoop sleeve and 466.0 knoop sleeve

Hardness Rating
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.

48.0 rockwell c stem and 53.0 rockwell c stem

Countersink Angle
The included angle of the countersink.

99.0 degrees and 101.0 degrees

Part Name Assigned By Controlling Agency
The name assigned to the item by the government agency or commercial organization controlling the design of the item.

fastener, blind, high strength, pull type, positive mechanical lock, 100 degree flush head

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

installed with single action tool

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel corrosion resisting mechanical lock or steel comp 1010 mechanical lock or steel comp 1020 mechanical lock or steel comp 1144 mechanical lock or steel comp 4037 mechanical lock or steel comp 4130 mechanical lock or iron alloy 660 mechanical lock

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel corrosion resisting sleeve

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel corrosion resisting stem

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

AMS5737 assn std single material response mechanical lock or AMS5690, TYPE316, cres assn std single material response mechanical lock

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

ASTM-A-331 assn std single material response sleeve

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

ASTM-A-331 assn std single material response stem

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium mechanical lock and passivate mechanical lock and aluminum mechanical lock

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium sleeve and aluminum sleeve

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium stem and aluminum stem

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416, TYPE1, CLASS3 fed spec single treatment response stem or MIL-C-83488 mil spec single treatment response stem

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416, TYPE2, CLASS2 fed spec single treatment response mechanical lock and QQ-P-35 fed spec single treatment response mechanical lock or MIL-C-83488 mil spec single treatment response mechanical lock

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416, TYPE2, CLASS2 fed spec single treatment response sleeve or MIL-C-83488 mil spec single treatment response sleeve

Answers.

What quantity is this sold in?

1EA

What material is the blind rivet made of ?

Steel corrosion resisting stem

What material is the blind rivet made of ?

Steel corrosion resisting sleeve

What material is the blind rivet made of ?

Steel corrosion resisting mechanical lock or steel comp 1010 mechanical lock or steel comp 1020 mechanical lock or steel comp 1144 mechanical lock or steel comp 4037 mechanical lock or steel comp 4130 mechanical lock or iron alloy 660 mechanical lock

What is the grip length?

0.656 inches minimum and 0.720 inches maximum

What is the head style?

Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

What is the NSN for MS90353S0611D?

5320-01-467-9276

How is this classified for shipping?

Schedule B number: 7318230000
nmfc 106510
Rivets of iron or steel

What's the federal classification of MS90353S0611D?

FSC 5320 ⁓ Rivets

NSN 5320-01-467-9276 RIVET,BLIND

Used on aircraft,f16. cadmium stem surface treated installed with single action tool fastener, blind, high strength, pull type, positive mechanical lock, 100 degree flush head 0.656" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style

NIIN
014679276
NIIN Date
09/21/99
Schedule B
7318230000 
Name Code
00864
FIIG
A040A0
Item Weight
0.000lbs
Item Dimensions
--
QUP
1 
Historical Price
$1.58 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

Major End Users Countries and entities

  • - Department of The Air Force 
  • - Poland 

Availability for MS90353S0611D A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
50.0 
LCL (less than a car load rating)
Unknown
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater 
Commodity (for shipments via water)
Metal hardware 
NMFC (national motor freight code)
106510 RIVETS I/S PLAIN/GALVANIZED ETC 
UFC (universal freight code)
54760 

Similar by Design Other rivets with similar characteristics

Nothing similar to this part number was found in our inventory

MS90353S0611D / Rivet,blindWhat is the formal definition of this item?

An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.