Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. MS90353S0503D specification
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.855in. ⁓55/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.162in. and 0.164in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
0.333in.
The device by which the item is expanded and set.
serrated STEM-Type w
The national stock number or the identification information of the end equipment for which the item is a part.
aircraft F-16
A measurement of the longest dimension of the grip,in distinction from width.
0.156in. and 0.220in.
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
326.0 knoop sleeve and 466.0 knoop sleeve
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
48.0 rockwell c stem and 53.0 rockwell c stem
The included angle of the countersink.
99.0 degrees and 101.0 degrees
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
fasterner, blind, high strengthpull type, positive mechanical lock, 100 degree flush head
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
installed with single action tool
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel corrosion resisting mechanical lock or steel comp 1010 mechanical lock or steel comp 1020 mechanical lock or steel comp 1144 mechanical lock or steel comp 4037 mechanical lock or steel comp 4130 mechanical lock or iron alloy 660 mechanical lock
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel corrosion resisting sleeve
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel corrosion resisting stem
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
AMS5737 assn std single material response mechanical lock or AMS5690, type 316, cres assn std single material response mechanical lock
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ASTM-A-331 assn std single material response stem
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium mechanical lock and passivate mechanical lock and aluminum mechanical lock
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium sleeve and aluminum sleeve
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium stem and aluminum stem
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416, TUPE1, CLASS3 fed spec single treatment response stem or MIL-C-83488 mil spec single treatment response stem
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416, TYPE2, CLASS2 fed spec single treatment response mechanical lock and QQ-P-35 fed spec single treatment response mechanical lock or MIL-C-83488 mil spec single treatment response mechanical lock
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416, TYPE2, CLASS2 fed spec single treatment response sleeve or MIL-C-83488 mil spec single treatment response sleeve
Answers.
Steel corrosion resisting stem
Steel corrosion resisting sleeve
Steel corrosion resisting mechanical lock or steel comp 1010 mechanical lock or steel comp 1020 mechanical lock or steel comp 1144 mechanical lock or steel comp 4037 mechanical lock or steel comp 4130 mechanical lock or iron alloy 660 mechanical lock
0.156 inches minimum and 0.220 inches maximum
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
Schedule B number: 7318230000
nmfc 096320
Rivets of iron or steel
FSC 5320 ⁓ Rivets
NSN 5320-01-468-5982 RIVET,BLIND
Used on aircraft f-16. cadmium stem surface treated installed with single action tool fasterner, blind, high strengthpull type, positive mechanical lock, 100 degree flush head 0.156" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style
- NIIN
- 014685982
- NIIN Date
- 10/15/99
- Schedule B
- 7318230000
- Name Code
- 00864
- FIIG
- A040A0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- Historical Price
- $11.00 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | MS90353 | Cage 96906 |
| 2. | MS90353 | Cage 96906 |
| 3. | MS90353 | Cage 96906 |
Major End Users Countries and entities
- - Department of The Navy
- - Department of The Air Force
- - Poland
- - Singapore
- - Greece
Availability for MS90353S0503D A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 096320 RIVETS I/S NICKEL PLATED BUFFED
- UFC (universal freight code)
- 50430
Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
MS90353S0503D / Rivet,blindWhat is the formal definition of this item?
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.
