MS20605S3C5

MS20605S3C5 Blind Rivet

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. MS20605S3C5 specification

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

0.390in. ⁓25/64"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

0.092in. and 0.097in.

Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

SELF-Plugging high clinch shank

Head Major Diameter

0.179in. and 0.183in.

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

0.251in. and 0.312in.

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

155 pounds per square inch

Shear Strength
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.

105 single pounds per square inch

Countersink Angle
The included angle of the countersink.

100.0 degrees

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 1008 or steel comp 1012 or steel comp 1018

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416, ty 2, cl 2 fed spec single treatment response

Test Data Document
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.

81349-MIL-R8814 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .

Specification/standard Data
The document designator of the specification or standard which established the item of supply.

96906-MS20605 government standard

Answers.

What material is the blind rivet made of ?

Steel comp 1008 or steel comp 1012 or steel comp 1018

What is the shear strength?

105 single pounds per square inch

What is the grip length?

0.251 inches minimum and 0.312 inches maximum

What is the head style?

Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

What is the NSN for MS20605S3C5?

5320-01-420-0972

How is this classified for shipping?

Schedule B number: 7318230000
Rivets of iron or steel

What's the federal classification of MS20605S3C5?

FSC 5320 ⁓ Rivets

NSN 5320-01-420-0972 RIVET,BLIND

cadmium surface treated 105 single pounds per square inch shear strength 0.251" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style

NIIN
014200972
NIIN Date
10/06/95
Schedule B
7318230000 
Name Code
00864
FIIG
A040A0
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

1. MIL-R-8814 Cage 81349

Major End Users Countries and entities

  • - Republic of Korea 
  • - Denmark 
  • - Norway 

Availability for MS20605S3C5 A member of our team will provide you with a price and availability quote

Request a Quote »

Similar by Design Other rivets with similar characteristics

Nothing similar to this part number was found in our inventory

MS20605S3C5 / Rivet,blindWhat is the formal definition of this item?

An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.