Serving our customers with quality and safety first.
0.357in. ⁓23/64"
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
0.124in. and 0.128in.
SELF-Plugging
0.221in. and 0.229in.
serrated STEM-Type w
0.188in. and 0.250in.
640 single pounds per square inch
98.5 degrees and 101.5 degrees
nickel alloy 400
QQ-N-281 fed spec single material response
any acceptable
Nickel alloy 400
640 single pounds per square inch
0.188 inches minimum and 0.250 inches maximum
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
Schedule B number: 7508900000
nmfc 139820
Other articles of nickel (excluding cloth, grill & netting of nickel wire)
FSC 5320 ⁓ Rivets
any acceptable surface treated 640 single pounds per square inch shear strength 0.188" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style
1. | AF6091-4-4 | Cage 53551 |
2. | CR9562R-4-4 | Cage 11815 |
3. | CR9562R-4-4 | Cage F7652 |
4. | CR9562R-4-4 | Cage R1120 |
5. | RV291-4-4B | Cage 98996 |
6. | CR9562R-4-4 | Cage FB009 |
Nothing similar to this part number was found in our inventory
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.