Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. MS20601B6W4 specification
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.402in. ⁓13/32"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.186in. and 0.190in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
SELF-Plugging
0.349in. and 0.357in.
The device by which the item is expanded and set.
serrated STEM-Type w
A measurement of the longest dimension of the grip,in distinction from width.
0.188in. and 0.250in.
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.
680 single pounds per square inch
The included angle of the countersink.
99.0 degrees and 101.0 degrees
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
sleeve dyed orange; w/special pulling head
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy 5056 body
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy 2017 stem
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-A-430 fed spec single material response body
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-A-430 fed spec single material response stem
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
anodize or oxide film
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-A-8625 mil spec 1st treatment response or MIL-C-5541 mil spec 2nd treatment response
Answers.
1PG
Aluminum alloy 2017 stem
Aluminum alloy 5056 body
680 single pounds per square inch
0.188 inches minimum and 0.250 inches maximum
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
Schedule B number: 7616103000
nmfc 013630
Aluminum rivets
FSC 5320 ⁓ Rivets
NSN 5320-00-616-5536 RIVET,BLIND
anodize or oxide film surface treated sleeve dyed orange; w/special pulling head 680 single pounds per square inch shear strength 0.188" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style
- NIIN
- 006165536
- NIIN Date
- 01/01/63
- Schedule B
- 7616103000
- Name Code
- 00864
- FIIG
- A040A0
- Item Weight
- 0.400lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $239.53 PG
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | CR9156-6-4 | Cage 11815 |
| 2. | AAF6051-6-4 | Cage 53551 |
| 3. | CR9156-6-4 | Cage R1120 |
| 4. | RV251-6-4 | Cage 98996 |
| 5. | RV251-6-4 | Cage 53551 |
Major End Users Countries and entities
- - Department of The Navy
- - Department of The Army
- - Department of The Air Force
- - U.s. Marine Corps
- - Spain
- - Canada
- - Germany
- - Republic of Korea
- - Greece
Availability for MS20601B6W4 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 013630 ALUM RIVETS
- UFC (universal freight code)
- 05720
Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
MS20601B6W4 / Rivet,blindWhat is the formal definition of this item?
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.
