Serving our customers with quality and safety first.
0.760in. ⁓49/64"
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
0.201in. and 0.203in.
0.349in. and 0.357in.
0.326in. and 0.405in.
760 single pounds per square inch
99.0 degrees and 101.0 degrees
aluminum alloy 5056
MIL-W-7986 mil spec single material response
anodize or oxide film
MIL-A-8625 mil spec 1st treatment response or MIL-C-5541 mil spec 2nd treatment response
Aluminum alloy 5056
760 single pounds per square inch
0.326 inches minimum and 0.405 inches maximum
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
Schedule B number: 7616103000
nmfc 106510
Aluminum rivets
FSC 5320 ⁓ Rivets
anodize or oxide film surface treated 760 single pounds per square inch shear strength 0.326" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style
1. | MS20603B6P40 | Cage 96906 |
2. | P56S-204-100-40 | Cage 18873 |
3. | 97-63002-017 | Cage 63910 |
4. | 97-63002-017 | Cage 0WLU1 |
5. | 97-63002-017 | Cage 14170 |
6. | 97-63002-017 | Cage 7B709 |
Nothing similar to this part number was found in our inventory
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.