Serving our customers with quality and safety first.
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
0.2575in. and 0.2595in.
threaded SELF-Plugging shank w/sleeve
0.499in. and 0.507in.
threaded stem
dry film or cetyl alcohol or paraffin wax
0.250in. and 0.300in.
drive nut
95000 pounds per square inch
129.0 degrees and 131.0 degrees
acetal per L-P-392, insert; mild steel, color brown, drivenut; 175 ksi ftu , screw; locking feature consists of 3 indentations located 120 degrees apart on the periphery of the nut component
annealed sleeve
iron alloy 660 bolt
steel comp 304 sleeve
titanium alloy uns R56400 nut
ams 5639 assn std single material response sleeve
ams 5732 assn std single material response bolt or ams 5731 assn std single material response bolt or ams 5737 assn std single material response bolt
MIL-T-9047 mil spec single material response nut or ams 4928 assn std single material response nut or ams 4967 assn std single material response nut
passivate bolt
passivate sleeve
phosphate nut
PS741, cagec 98524 mfr ref single treatment response nut
QQ-P-35 fed spec single treatment response bolt
QQ-P-35 fed spec single treatment response sleeve
Titanium alloy uns r56400 nut
Steel comp 304 sleeve
Iron alloy 660 bolt
0.250 inches minimum and 0.300 inches maximum
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
Schedule B number: 7318230000
nmfc 106510
Rivets of iron or steel
FSC 5320 ⁓ Rivets
phosphate nut surface treated acetal per l-p-392, insert; mild steel, color brown, drivenut; 175 ksi ftu , screw; locking feature consists of 3 indentations located 120 degrees apart on the periphery of the nut component 0.250" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style
1. | 3D0109-8-300 | Cage 88277 |
Nothing similar to this part number was found in our inventory
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.