Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. MBF2113C-8-250 specification
The application of color or a series of colors for the expressed purpose of identifying the specific functional design and/or the system application of an item.
gray
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.942in. ⁓61/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.2575in. and 0.2595in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
threaded SELF-Plugging shank w/sleeve
0.463in. and 0.507in.
The device by which the item is expanded and set.
threaded stem and expander
A substance designed to provide a reduction of friction between the two surfaces in contact.
cetyl alcohol or carbo wax or paraffin wax
A measurement of the longest dimension of the grip,in distinction from width.
0.200in. and 0.250in.
Those features,not otherwise specified,which may be required for proper functioning of the item.
drive nut
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
2100 pounds per square inch
The stress at which a material exhibits a specified limiting deviation from the proportionality of stress or strain.
2100 pounds per square inch
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.
7900 double pounds per square inch
The included angle of the countersink.
129.0 degrees and 131.0 degrees
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
powder blast top of head.
The chemical compound or mechanical mixture properties of which the item is fabricated.
iron alloy 660 stem
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 304 expander
The chemical compound or mechanical mixture properties of which the item is fabricated.
titanium alloy uns R56400 body
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
AMS4928 assn std single material response body or AMS4967 assn std single material response body
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
AMS5639 assn std single material response expander
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
AMS5731 assn std single material response stem or AMS5732 assn std single material response stem or AMS5737 assn std single material response stem
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate expander
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate stem
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-35 fed spec single treatment response expander
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-35 fed spec single treatment response stem
The document designator of the specification or standard which established the item of supply.
76823-03A146 manufacturers standard
Answers.
Titanium alloy uns r56400 body
Steel comp 304 expander
Iron alloy 660 stem
7900 double pounds per square inch
0.200 inches minimum and 0.250 inches maximum
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
Schedule B number: 8108908000
nmfc 106510
Other wrought titanium
FSC 5320 ⁓ Rivets
NSN 5320-01-392-3414 RIVET,BLIND
passivate stem surface treated powder blast top of head. 7900 double pounds per square inch shear strength 0.200" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style
- NIIN
- 013923414
- NIIN Date
- 06/28/94
- Schedule B
- 8108908000
- Name Code
- 00864
- FIIG
- A040A0
- QUP
- Historical Price
- $1.00 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 03A146V08-250 | Cage 76823 |
Major End Users Countries and entities
- - Department of The Air Force
Availability for MBF2113C-8-250 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 50.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 106510 RIVETS I/S PLAIN/GALVANIZED ETC
- UFC (universal freight code)
- 54760
Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
MBF2113C-8-250 / Rivet,blindWhat is the formal definition of this item?
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.
